Jump to content

Infinity Beta 50 an upgrade from f15?


oldslow

Recommended Posts

RF-15 Specifications frequency response 46Hz-20kHz ±3dB power handling 100 watts maximum continuous (400 watts peak) sensitivity 96dB @ 2.83 volts/1 meter nominal impedance 8 ohms compatible tweeter K-131-AN 1" (2.54cm) Titanium dome compression driver high frequency horn 5" square 90°x60° Tractrix® Horn woofer Two K-1131-AB 5.25" (13.34cm) Cerametallic® cone / cast polymer frame enclosure material Medium density fiberboard construction (MDF) enclosure type Bass reflex via rear-mounted port input connections Two sets of binding post speaker terminals (connected via brass strap jumpers) dimensions 36.9" (93.7cm) x 6.75" (17.2cm) x 12.75" (32.4cm) weight 37lbs. (16.8kg) finishes Black Ash, Light Cherry wood-grain vinyl built from 2003 built until 2006

Infinity Beta 50 specs:

Speaker Type 3-way Response Bandwidth 35 - 20000 Hz Input Impedance 8 Ohm Recommended Amplifier Power 10 - 250 Watt Sensitivity 91 dB Crossover Frequency 600Hz, 3200Hz Magnetic Shield Yes Connectivity Technology Wired Recommended Placing Floor-standing Detachable Grilles Yes
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...