jdeanmc Posted February 5, 2008 Share Posted February 5, 2008 I have a ksw-12.ive got twossub outputs from a sony str-de925 rec.with only one going to the l/lfeinput to the sub, is this correct,also i have the sub x-over turned allthe way clockwise(allowing the rec.to send signal to sub??? do i notneed another cable goig to the ®input on sub?if so do i just run thisfrom the remaining sub output of the receiver?? Help Dean Quote Link to comment Share on other sites More sharing options...
TheEAR Posted February 5, 2008 Share Posted February 5, 2008 No need to run another cable,the two sub outputs send the SAME signal. As the .1 channel is ONE low frequency channel. The level being set and phase above allmatched with mains you should be fine. Also a good idea to set the crossover point on the sub to max and let the receiver do its duty. This way if your receiver has selectable cutoff (mains to sub,you will not have to set it again on the sub). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.