Jump to content

"dead" RSW 12


TerjeR

Recommended Posts

Hi, Igot some problem with my rsw12.

Suddenly it died..

There is still light in it, and if I turn it off and on again it works again, but only for very low volume.

As soon as I increase the volum just a bit, it goes silent again..

But still there is a green light in front, when it goes silent/dead.

I have to turn it off and on again to make it sound again.

Anybody known with this problem?

Link to comment
Share on other sites

I have been in contact wih them, and they did not have any suggestions what to try..

I am waiting for a new amplifier, but I think it is just a minor fault?

But it`s of course much easier for both me and Klipsch to change the whole amp :)

Link to comment
Share on other sites

But it`s of course much easier for both me and Klipsch to change the whole amp :)

Good luck on that "easy" part and welcome to the Forum. If you are going to be the one that takes off the drivers and reinstall the amp/preamp make sure you pay attention to where all of the wires go (a Digital Camera is helpful) and that you have the proper T-15, tool to take out the screws. :-)

Link to comment
Share on other sites

But it`s of course much easier for both me and Klipsch to change the whole amp :)

Good luck on that "easy" part and welcome to the Forum. If you are going to be the one that takes off the drivers and reinstall the amp/preamp make sure you pay attention to where all of the wires go (a Digital Camera is helpful) and that you have the proper T-15, tool to take out the screws. :-)

Thank you!

I have already taken of the drivers and are waiting for the new amp to arrive:)

Probarbly a couple of weeks waiting before I get it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...