nathometheatre

Good Day Dean, I have read all over the net in various forums about your cross-overs, and other upgrades I can make with my Klipsch RF-7's and RC-7. I also have a good friend that has a pair of Infinity Alpha 50's and Infinity Alpha Center Channel. Can you email me your info please? I can either be reached at nathometheatre@verizon.net, or call me cell @ 214-793-4443. Thank you! Kevin Turpin

seeing that you had an RC-7, do you like the RC-64 better? Can you tell a signifcant difference in performance?

Flip those bad boys on their sides as I suggested, as the mounts are around $60 last time I checked, and that would make a world of difference allowing you much more flexibility using their current position.

Youthman, Did you ever add the RS-62's to the sides of your theatre? I recall reading where you had planned on doing this, but I don't see them in the pics of your theatre. Did you decide to go 5.1 instead? I know their expensive, but you can find them all over the net for under $700 for the pair. I know when I added my RS-7's to my theatre it really pulled the front sound stage together with my rear surrounds. I really like your theatre! Incredible job, and done on a reasonable budget to boot!

Pictures are worth a thousand words....... Can you post some pics for us to see?

Yes, I'm actually in the process of getting ideas on how to approach my whole theatre with acoustical treatment and bass traps. I've had several conversations via other forums (in particular www.hometheatershack.com one of my favorites, as these guys really know their stuff!), and I found a company called GIK acoustics that makes acoustical panels with artwork provided by the buyer, or they have thousands of choices to choose from on their site. I really didn't want to have to remove my theatre decorations, especially my framed movie pictures. So I found these http://www.hometheatershack.com/forums/system-setup-connection/17170-bi-wiring-speakers-2.html . Anyone know of this company? Bought any of their products? Also, if you guys can read this thread without having to become a member of the site, this is one of the best articles I've read about trying to address acoustical issues in your theatre, and how it will never be like the real thing (as far as live performances), and all we can do as try to get it as close as we can. Great article! http://www.hometheatershack.com/forums/general-discussion/21437-logic-semantics-conclusions-philosophy.html This subject is really for another thread, but if you guys post on a different thread let me know where you went. Thanks, Nathometheatre

Youthman, I found your thread showing your theatre from beginning to end, and read the entire thread! It was great watching your theatre come to life in the end! Job well done! I'm about to build a riser for the rear seats in my theatre as well using your design (among others) as an example. With all the insullation you added in the riser, did you notice a significant difference with the bass from your sub? Adding insullation in a riser is a great way to trap LFE in your room, so I was wondering how much of a difference this actually made. I'm also about to address the whole room with acoustical panels and bass traps to address the standing waves and early reflections I'm getting from my sound stage. also, I saw how you mounted your rear RB-35's, and would think you'd be missing some of the surround effects being that their not pointing down towards the main listening area. Being that the RB-35's are a direct radiating speaker, you could turn them sideways to allow more room to point them down. I had the same issue with my rear RB-25's, and had to do this, which made a sigificant difference! That being said, you'd have to replace the brackets you're currently using to accommodate them laying on their sides. Just a thought. I wish I would have seen your thread before you mounted them, so I could have suggested this earlier. Anyway, this may not even be an issue in your theatre, just thought I'd mention this.

Here's a side view of the RC-7 mounted shelf. Hope this helps!

Attached is my RC-7 wall mounted using a 1/2" shelf that's cut to 28" wide x 18" deep. I bought two steel shelf supports from Home Depot, and screwed them into the studs, and then screwed the shelf down on the top of the brackets. This will easily support an RC-7.

Thanks a ton for recommending acoustimac! I've been looking at different materials, designs etc...... And this really helped me out! Nathometheatre

I think you'll be happy with either the RC-3 or RC-3II, as both are good centers. As one reply already said, it's best to have the same series (driver materials) in your front three speakers. I've had them all, including the JBL Northridge series many moons ago, and I thought they sounded good. At least until I upgraded to the Reference 7 series.

Sorry for the confusion. My descriptions were not corresponding with the correct pictures taken, but I think you guys can put it together. Were still going to remove the computer under the rear speakers, and add a 5" riser to accommodate the rear two seats. The wiring you see hanging from the ceiling was from some old track lighting witch were replacing too! Once were completely done I'll post new pics (with the correct descriptions!). Hope you enjoy our humble little theatre! Kevin

Front pics didnt come out as well, but you can still get the idea. Mounting the RC-7 using two steel "L" shaped brackets was tough! Had to find both studs 16" apart to hold this beast!

left side RS-7

sorry. not familiar with how to post pics several at a time.

Our make shift home theatre. Still lots of work needed, eg; new carpet, sound panels, new theatre seats & decorative wall treatments. This little room is only 9' wide x 19' deep. So I can only fit 2 recliners x 2 rows. The kids lay on bean bag chairs in the front, so with kids we can seat 6-7 comfortably. One other big (litterally) issue, is that the sub I currently have is an SVS PB12/Plus2! It takes up too much space, and currently I have it up against the right wall being used as a coffee table (unless were watching heavily bass encoded movies, and it will rattle anything sitting on top of it OFF). But, for now this little theatre sounds incredible and we look forward to watching movies almost every night!

Guy's I feel stupid asking you this... But please enlighten me on what Dean G modification is?? Thank you! Kevin

jrios, One thing i like about the RB-75's is that I have mine on 42" Sanus steel foundation stands, and since my center channel (RC-7) sits atop my entertainment center (about 5 1/2 feet high), my RB-75's are closer in height to my RC-7 which provides a more seamless sound stage. Your right though, the RF-7's do handle the mid range and about 35Hz-40Hz range better than the Bookshelfs do. But with a really nice and musical sub (like the PB12/Plus2), I just used the AVIA calibration disk for Home Theatre along with Radio Shacks analog SPL, and dialed in my sub right where my RB-75's start to roll off (about 50Hz although Klipsch says they will play down to 42Hz) and honestly I can't tell where the sub picks up and the RB-75's roll off! It's pretty seamless from 20Hz - 20Khz (when I run a sweep test). Some believe that bookshelf speakers (or Monitors) sound better in the midrange to Hi range area (all depending on the room size ofcourse), and I have to agree! I did test the RF-7's next to the RB-75's, and with a sub as powerful as your Velodyne and my SVS, I really think there is too much overkill in the bass department. My personal taste is either let the Floor Stander RF-7's provide most of the bass and set your sub's X-over @ its lowest setting so there's not bass overkill with the RF-7's or, do like what you and I are trying to achieve and set your subs X-over (via the receiver, not the subs X-over on the back. Just bypass and use the amps X-over if applicable) @ 60Hz and set all speakers to small. This is what I did when I calibrated my system with the AVIA test kit, and it made major improvements!! Im not planning on changing a thing unless when SVS finally gets their MTS line of speakers in production I might check those out and possibly replace my existing Klipsch speakers, but their going to have to sound D*#! good for me to make that change! Also, have you considered keeping your RB-75's as your mains and buying a pair of Klipsch RS-7's? If not, you should! They freakin sound excellent, and add alot more deminsion to your rear sound stage than a directional speaker like the RB-75's will do! I actually have a 7.1 system using the RS-7's as my side speakers with a pair of RB-25's as my rear speakers. I know this sounds like a contradiction to a sort, but when using them (the rs-7's) as side speakers, they blend the rear sound stage in so well, that it makes the whole room sound 3 deminsional. Otherwise, in a 5.1 system, I would just have a pair of RS-7's as my rear speakers. Anyway, I kinda got off subject since this is the "Lets See Your Home Theatre" thread, but nice talking with you and good luck with your home theatre! Nathometheatre

How do you like your RB-75's as your front main speakers? I have the same set up for my sound stage and love it! What surround speakers are you using (if any). That Velodyne is pretty nice too! Im currently using an SVS PB12/Plus2, and it really blends well with my RB-75's & RC-7! I don't see the need for tower speakers after hearing this set up! Do you?

Mike, I noticed that you have the RF-5's for your front mains. I currently have the RB-75's (which are the bookshelf version of the RF-7's) as my main speakers, and have them on 42" Sanus Steel Foundation speaker stands. I gave some serious thought into going with the RF-5's, but since the RB-75's have the same tweeter as the RC-7 Center Channel does, I decided to go with the bookshelf speakers. Whats your opinion of the RF-5's, and can you tell a difference in the soundstage with the RF-5's 1"tweeter vrs. the RC-7 Center's 1.75" tweeter? Im very happy with my RB-75's and as far as bass goes, I have an SVS PB12/Plus2 which is a freakin beast! So I dont lack bass by a long shot, but, just wondered what the difference is as far as sound quality between the RB-75's and RF-5's? Any input would be nice! Thanks, Nathometheatre

Mike, Yes SVS has a new driver for their Plus series called the 12.3 driver which is sprayed with a black aluminized paint that is suppose to help the heat disperse more evenly, and add durability to the cone itself! Also it's a completely different design! Check it out on www.svsubwoofers.com and go to the PB12/Plus2. SVS will give previous SVS customers a discounted price on the new 12.3 driver, and let you keep your old drivers! If you bought yours a couple of years ago, you either have the 12.1 or 12.2 drivers. Many SVS customers are upgrading to the new driver! You will see where they are selling their old 12.2 drivers on ebay and audiogon. Its definately worth the upgrade!! Good Luck! Nathometheatre

Cas, I don't doubt it a bit regarding what your PB12/Plus2 is capable of! I upgraded my 25-31pci to the Plus/2 (with the upgraded drivers SVS started putting in their subs this year), and its just scary low bass! Have you upgraded your drivers to the new 12.3 drivers yet? You can get a discount through SVS and they will let you keep your old 12.2 drivers! You can sell them on ebay or audiogon, and almost break even! Its worth a look if you bought your PB12/Plus2 before Feb 06'! Thanks, Nathometheatre

Wrench722, What kind of speaker mounts are you using for your rears and sides?? I've looked everywhere and no such luck! any help would be much appreciated! Thanks! Nathometheatre

Picky, What a nice set up you have! Your HT is definately in the top 20 based on what I've seen! Very classy! Nice and organized equiptment rack! The built in fan at the top is a nice touch! We have very similar taste, and Im in the process of converting our 19'long X 9' wide study (with no windows) in to our new HT. Im currently looking for the best price/performance HT Projector, and really don't want to spend more than $1500 if I can. Any suggestions?? The only change I've made to my system lately, is upgrading my RSW-12 Sub to SVS's PB12/Plus2. This can only be done properly if you have the space to accommodate its size. But for $1199.00 plus $99 S/H, its the best sounding subwoofer (and very few in the world can match its 18Hz output @ 115 dbls in my current room) i've encounter yet! But, if your Klipsch RSW-15 makes you happy, by all means, its a beast of a sub too (properly calibrated that is)! One other thing I noticed regarding one of your RS-7 side surround speakers, is that on the left tweeter it is placed right next to a wall, hence blocking its projection capability. Is this noticeable in any way? In any case, great job!! Many hours went in to this "small house theater"! Regards, Nathometheatre

Well Guys, I think I made the right decision, and this should probably be in the Subwoofer Threads. But, I just sold my Klipsch RSW-12 (brand new), and bought the entry level SVS 25/31PCI (custom tuned to 22Hz, but won't really drop off until it reaches 18Hz depending on room size etc...). I made this choice after reading some unbiased reviews and SPL test showing that although the Klipsch RSW-12's specs show its bottom end at 22Hz. Well, after much research and performing sweep test at various SPL's the RSW-12 is really strong and flat in the 40Hz and above range. This blew me away! Don't please don't think for a moment that Im throwing the RSW-12 under the bus by any means. It does sound fantastic, and will produce between 35-40Hz at 108dbls (pretty damn loud) and will still shake your pictures off the wall if thats your thing. But, if you want to experience what the 25-30Hz range (also at near reference level volumes), such as the beginning of Star Wars ROTS which produces frequencies down to 15Hz and even lower in some cases (depending on your home theater and where your sub is located), the SVS 25-31PCI (SVS's entry level powered cylinder sub) will dominate with ease! If you have an SVS (or two) I would love to see how it looks in your home theater, and your opinions on its performance. I couldn't believe what you get for just under $600 bucks! Does anyone own two or more of these, or own their higher end plus series or Ultra series? I really would like to see some pics of these subs and how you have them set up in your Home theaters! If you own a Klipsch Sub (reference series or THX Ultra 2 series) you already own a great sub for the price. But for those that want to experience what any of the Star Wars episodes, Monsters Inc, U571 and many other dynamic sounding movies where originally intended to produce concerning the low end frequencies, you have got to check out these SVS subs! I posted this review on this forum because I really would like to see how many of you out there own these subs, and where you placed them in your Home Theater! Many thanks for reading my post! Nathometheatre