Jump to content

GregB

Regulars
  • Posts

    23
  • Joined

  • Last visited

GregB's Achievements

Member

Member (2/9)

0

Reputation

  1. Dean - Thank you for your reply. I changed speaker wire from the Home Depot solid core to Radio Shack 16ga zip cord and stripped the end of the wire to run through both sets to binding posts. Helped get rid of some of the oddness I was hearing up top which I now attribute to the supplied link thingies. I think they roll off the treble in a way that can make some sounds seem unatural. At any rate, the speakers are not *horribly* messy up top - just too brutal and possibly accentuating faults that are there. This does make them a tad difficult to live with in a domestic setup with less-than-stellar (TV signal, iPod, etc.) sources. Others - were your comments about the RF-7's or the Heresy IIIs? - Greg <-who thinks the Heresy IIIs are *almost* perfect - just gotta smooth out the top a bit
  2. Dean - Do you know if the same or a similar mod can help Heresy III's? - GregB
  3. I dug through by Bag of Wire looking for some alternative wire and no luck. Only Kimber, which I tried before and was the brightest/edgiest of the cables I had at the time. Too capacitive, I think. Naim's NACA5 worked best - its a higher inductance wire. Its gone though, included as part of the deal when I sold the Heresy's predecessors. Would the solid core Home Depot wire possibly cause poor treble quality? Also, can someone explain what is meant by an "impedence mismatch" and how it affects the sound? And finally - I would LOVE to hear from any Klipsch owners in my area. I live in Northern Virginia in the Oakton/Vienna area. I would love to hear someone else's Kilpsch installation and/or have someone experienced with Klipsch come hear mine. - GregB
  4. Update on the splashy trebble situation (its not just sibilance)... I did as suggested and switched back from biwiring to standard wiring with the wires running to the lower posts (bass) and using the supplied jumper thingies. The wires are still Home Depot 12 or 14 guage solid core. The Good is the speakers are now listenable without the tissue paper :-) But...the highs are just not clean and *may* even have some sort of phase problem. Tinkley bells for instance (much of that being played now as its XMas season) just lack the naturalness they have with other speakers. They sound 'off' somehow. I am wondering if there is somthing amiss either in the crossover design or in my crossovers in particular that is messing up the highs. Reading other posts on the forum, Rotel amps seem an OK match so I'm not running to replace my amp (1062) at this point. I was reading about a speaker manufactured by another company. The owner/lead designer came on their forum and admitted a mistake was made when attempting a last-minute upgrade to one of the crossover parts (a cap, I believe). He thought he could just drop in the higher spec cap and all would be well but the change created unanticipated phase problems that resulted in odd peaks and valleys that would rip your ears off!!! They offered to anyone who had speakers in such-and-such a serial no. range to send them back for a free fix. Thoughts? - GregB
  5. I remember my Naim speakers (Allaes) took over 4 months to fully run in and sound clean up top. I had the tissue over the ScanSpeak tweeters in those for 5 months! So...I will give the Heresy's 4+ months and reevaluate. They are OK with 2 layers of tissue, so we are enjoying them without pain at the moment. I do know that the highs are not clean and just masking nasty stuff is not where I would like to be, long term. I remember the Totem speakers (Staffs) sounded amazingly clean and seemed to go on for ever up top, even with tele as source. Hard to shake that once you have heard it. Its also hard to shake the great dynamics of the Heresy's once heard, hence I have a real problem here! - GregB
  6. Its not just sibilance - the highs are just not as clean as I'm used to from other speakers (Naim, ProAc, Totem, Meadowlark, B&W) in nearly the same setup. The Rotel amp is fairly new and has not been used with all of the aforementioned speakers, but has shown no signs of not being clean up top. It is both speakers - and with the grilles off and me close, I can hear the tweeter 'spitting' at me and not just with vocals. I am currently using the 'tissue paper fix' - two layers, and it makes them listenable and, of course, downright enjoyable. I love the dynamics and, for the price, the bass is quite good too. I'm not a believer in the "its in the recording" theory. Perhaps with some recordings yes - but it shouldn't be *annoying* and with many recordings and every source. Tele is quite raspy when it has never been before. - GregB
  7. Well, I'm past the two month mark with my new Heresy III's and they are sibilant and just not clean up top. Anyone else experience this? What can be done? Pertnering equipment is a Rotel integrated amp (fairly new, reputed to be clean) with a Rotel CD player, Mistubishi TV, and iPod as sources. I have tried a few different speaker wires that I have and am currently running 12 gauge solid core from Home Depot biwired. Any help greatly appreciated. I really like what else the speakers do, but if the sibilance/messy trebble persists, the Heresy's will have to go. - GregB
  8. Yea, I'm surprised so *little* foam would make such a difference. Do tell as perhaps my room is closer to Nirvana than I realize! - GregB
  9. Jim - I suspect many of us have heard them outside the home at movie theatres and never even known! My Heresys have a very 'theater' sound. - GregB
  10. GRB - I just bought a pair of Heresy III's, but would love to hear your Cornwalls! I live in Northern VA and so would gladly make the trip to your place, if you didn't mind. I have a year trade up on the Heresy's and know my dealer would be thrilled if I came in and spent the extra dosh on the Cornwalls. We are doing very well with the Heresy III's mind you, but could stretch to the Cornwalls if they are truely full range and 'nirvana' compared to the Heresys. My personal email is gobeatty@yahoo.com if you would rather. - GregB
  11. Thanx for the pic - I have new Heresy III's (and imagine my sons fighting over them years hence) and now I have a good idea what they look like on the inside :-) - GregB
  12. "Just a little smaller sound then it's 3 bigger brothers , still can't belive the sound out of that small cabinet." Yes - I accept that - the littleset brother isn't quite the same as the biggest broher...but is from the same, wonderful, family :-) - GregB
  13. Regarding run-in: And what would he(PWK) say...I wonder... - GregB "Bull&hit!" Hum...I hope not. The upper mids and treble have trouble when things get busy up top. I'm hoping this clears up when the titanium drivers break in. - GregB
  14. Danny - You mention tennis balls underneath. Is this just to raise the front so the tweeters point up? Would you suggest this in addition to the riser base that came with my III's? - GregB
  15. Yikes!!! Its the little ones for now because I have two little ones!!! A 3 1/2 year old and a 1 year old. The Heresys just tuck away in the corners and do their biz. The Redskins game last night, even though ESPN's audio sucks pond water (at least via our cable provider), was mucho more dramatic that football has been though previous speakers. - GregB
×
×
  • Create New...