bekim99

heres the other half of the room thank you! id like to move the 7's to the center channel and get something bigger with more of a powerful sound. but first im going to try a couple of subs in there. i listen to 2 channel more than movies soo... I might even try a tube amp cause they say its a warmer sound thats what im looking for as long as it can play those 7's loud!

tried to resize not workn but what got cut off in pic looks just like what you see.

I like acdc metallica classic rock rock music. All i want is more powerful sound at high volumes. it seems like when i turn it up max I need to cut the highs on my processors eq all the way down to negative 10. and the mids start t sound muddy and loose there quality. I just hate when they start to fall off. I just want them to keep going in spl and quality. Would another set of 7's be louder with less volume? and just stack them somehow? Or stick to the idea of bigger amp(s)? The 2 rf5's are my center channel just for my movis ran off a different amp.

hey yall i have a set of 7's just like to see if anyone wants to chime in and express there opinion here. I obviously have a emotive xpa 2 running the 7's i still would like it louder. They get LOUD, but they seem to fall off at a certain point. I was wondering if I got another xpa 2 and bridged em would that help or get a totally different amp setup totally?? Anyone know? Every now and then i like to crank it up especially when theres ufc parties and all. I kinda want people to say dam. I just imagine that old pic of that guy sitting in a chair getting blown away by his 2 speakers thats what I want to have on tap. I want more powerfull sound.

ok thanks for the responses. these speakers are just huge compared to the 5's or 82's I love it!!!! Just watching tv I can tell the difference in detail and clarity the 7's have. The denon avr 5800 it set to LARGE for the fronts and i have the 7's in stereo right now running them full bor off the denon poa 2200. Im just watching tv or a movie since were in a room real small now due to the unfinished addition at the house. I built a room 24' by 38' and its all open so im going to need to do some real sound dampening up there. But anyways the amp has never cut off or went in to protection mode. To be honest I want to get a different 2 ch. amp for the 7's Im willing to spend 1000.00 or so and I want a really warm sounding amp with solid mids explosive lows, and plenty of juice for the dynamics of course. the horns take care of the highs no matter what. Sooo if anyone out there has any suggestions on what to look for?? thank you!!!

alright I FINALLY purchased a pair of rf 7's[] So i hooked them up to my poa 2200 (denon) and they sound great but,,, I get no mids or low end from them the woofers dont even move. Well they do you just need to be 6 inches from em to see it!!! whats going on here I really want these things to rock and put out warm throaty sounds in my opinion these things should be putting out more mids and booms than the 12" senrgy sub i have right???? Ill switch back and forth (using the A and B buttons on the amp) from my 82's to my 7's and they sound almost the same. One would assume for the difference in speakers there should be a signifigant difference in sound????? my hunch is I need some serious power????? IDK any suggestions THANK YOU!!!

thats what i thought as well, but the factory tag says 250 max could these be a "limited edition" on these or whatever??? the bottom woofer on one speaker is crinkled but is fully intact and from what i can tell it has no effect sonically what so ever. but id like to replace it anyway and klipsch never answers the phone[8o|]

just bought a pair of used rf 5 the tag on the back says 250 max. arnt most 150 max??? whats up with that?? thank you!!!! P.S there a lot more warmer speaker than the rf 82's

thank guys! the amp has been sittin in a box for years now, and theres no rush. My dad has owned since new and i thought id try to c whats up with it.

anyone know why the right channel is getting very hot very quickly??? sansui said check the bias, i have no clue what that is. the model is au999 i downloaded the manual and cant find the bias???

this is what i ended up buying DENON DP-29F ANALOG TURNTABLE DP29F CART&NEEDLE INC. just a cheapie but i can always go up from here. hopefully its a good starter unit??

well i suppose id want fully auto? and id be willing to spend a few hundred or so

hi there im curious about vinyl turntables which are the good ones and whats better direct drive, belt driven etc... need some advice. since im a younger cat i know nothing about them. thank you everybody!!!!!

bob carver m-40t or a carver a-760x to power some 82's possibly 63's in the future. thanks

bob carver m-4.0t or a bob carver a-760x to power some 82's possibly 63's in the future?????? thanks for feedback

ok thank you guys ill keep my eyes peeled for the 63's no big hurry i was just curious.

thanks for all the feedback. im in no big hurry so im going to take my time and look for a good amp with tons of power to spare. but we all agree that if I get say like a emotiva xpa 3ch. and power just my 3 fronts and let my denon avr 5800 take care of the other 4 speakers ill notice a difference up front?????? thank you its soooo hard with all the options out there and not having a store to demo anything besides the local best buy. oh and being new to all this higher end audio goodies

i found a denon poa 8300 is it worth my time or should i look for something else???? the only reason im considering it cause i have a denon avr5800. Since im new to all this external amps etc... and with no shops around me its hard to learn. i want a explosive sound with quality no matter how loud i turn it up. I want tons of mids with nothing but crisp solid bass. (ht) i guess im hooked on wpc and i know it dosent come down to that number but what kind of quality the current is correct??? in the future i want to get some 7's or 63's and put the 82's in back. i just dont want to buy a amp and be thinking my 5800 powered em better and i wasted my money. thank you everybody

i found a denon poa 8300 is it worth my time or should i look for something else???? the only reason im considering it cause i have a denon avr5800. Since im new to all this external amps etc... and with no shops around me its hard to learn. i want a explosive sound with quality no matter how loud i turn it up. I want tons of mids with nothing but crisp solid bass. (ht) i guess im hooked on wpc and i know it dosent come down to that number but what kind of quality the current is correct??? in the future i want to get some 7's or 63's and put the 82's in back. i just dont want to buy a amp and be thinking my 5800 powered em better and i wasted my money. thank you everybody

first off id like to say i love quality sound and total control over my individual speakers. so im confused about watts going to a speaker. the klipsch site says you should have more power going to a speaker than it can handle otherwise youd be clipping them right??? so i bought a denon 5800 supposably it give out170 wpc? why then are guys saying on this forum all you need is 20-30 wpc to make the reference line come to life. so 20-30 wattscoming from a external amp or tube amp put out better juice than my denon then?? thanks guys and gals

ok so what would you recommend is a good 3 channel amp?? i know they get pricey but if i get some ideas ill shop around and buy at the right time. and i plan on getting some rs 7's

so what other componets are you referring too then???? thank you!

hey guys quik question i have 82's with a denon 5800 and im looking to get 63's or rf 7's. anyways whats the difference in sound between the 82's and 63's??? theres no place even close to demo them so do the 63's put out more low end than the 82's even tho there 6"ers??? basically is it worth upgrading??? i listen to music and watch movies with my system. thank you everybody for helping.

so what will happen to a 8 ohm speaker with 4 ohm running to it???? i know the amp will work harder but will it recognize theres 2 speakers hooked up and automatically push 4 ohm to them???