yesmynameisking
-
Posts
37 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by yesmynameisking
-
-
I want to recap for Klipsch Forte. There are the original Forte's (not Forte II's). Please let me know the cap values
-
-
1
-
-
First questions. Has anyone ever tried removing the passive radiators and sealing the back of Forte II's?
Second question. Should I buy ALK Engineering Crossovers or Bob Crites Crossovers for my Forte II's?
-
Though most purists are against it, I could not disagree more. Bi-Amped sounds like LIVE MUSIC. This is my second bi-amped system. Here is what I’ve done.
My preamplifier is a restored McIntosh MX110Z with Mallard’s. I send the signal from my preamp into a Schiit Audio Loki 4-band equalizer which boosts the signal just a little without degrading the sound. From the equalizer, I use RCA Y-Cables to divide signal for two amps.
Driving the low end is a NAD 902 solid-state amplifier which is rated at 30 watts per channel (with lots of headroom).
For the squawkers and tweeters, I’m using a modified Dynaco ST-70 that was upgraded by Justin Webber of Amps and Sound. My RCA cable has a volume control to fine-tune contrast between the NAD and the Dyanco to get a perfect balance for all types of music and all types of listing levels. You’ll really love how rich, full, and lifelike you can make low volume level sound.
For my speakers, I’ve got Forte II’s with modifications. They have Bob Crites woofers and Bob Crites tweeter diaphragms. I have an ALK Engineering tweeter attenuators dialing back the tweeter 3dBs. For the crossovers, I use the stock crossover for the squawkers and tweeters, and for the woofers, Bob Crites made me a custom set of crossovers. I installed a second set of banana plugs intoo back of the Forte's. The last thing I did was for cosmetics, though I think it improves the sound a little too. I removed the ugly Forte raisers and put furniture legs on the front using the same screw holes the raisers used. They sit slightly slanted back Heresy style and look so much cleaner and modern.
Reach out with any questions. Local Southern California’s are invited to come over for a listen.
-
I have a pair of Forte II's. One of my woofers just got blown.
Do I want to replace it with a stock Klipsch woofer?
Or, do I want to buy a pair of Bob Crites Forte woofers?
Which sounds best?
I power them with an all tube system consisting of a McIntosh MX110z and Amps and Sound Single-Ended KT88 Amplifier.
Cheers,
Michael
-
Customer built with attention to all details by Dave Harris of Fastlane Audio. No expense spared on the build. Hearing then will make you a believer.
-
The horn is very similar to the horn from a La Scala. Some would say it is even a better horn.
-
Incredible Klipsch Cornwall with all upgrades to make this one of the nicest Cornscala's you'll ever hear. It starts life with 2 original Klipsch cabs with matching serial numbers. The cabs were refreshed by a cabinet finisher and look close to new. The grills are new as well. The K33 was replaced with the mammoth Eminence 15C which is a direct drop in. The original K33 is made by eminence as well. The K700 mid horn and fried K77s are replaced with B&C DE85TN a true 2" driver able to cross at 400hz. The DE85tn is mated to Dave Harris/ Fastlane audio's crazy elliptical horn and is flush mounted into the cabs. Dave built this pair of speaker to prove his horns and the B&C DE85TN fits. Crossovers are ALK which is the only way to go with klipsch products. This is the APT12-500. Risers are tilted like Klipsch Heresy's for improved sound and imaging. What you're getting is a vintage set of cornwalls/ with 100% new parts that are much better than even the Cornwall III....
Local pick up preferred. Shipping is possible. Due to weight and size it might cost a bit. We can talk about it and get a quote to see if it makes since. Call or text Michale with questions 805-208-9713
-
Matt,
The Pioneer dual-sub says it in 8 ohm on the label (see picture). Though is says "8 ohm", do you think it is really 4 ohms? Let me know.
Thanks,
Mike
-
Is it safe to run two sets of speakers on a Fisher 400 using a Passive Switch Box (with protection) like the one in the picture?
One set of speakers would be vintage Grundig's (see photo) from the 1960's that I believe are 6 ohms. The second set of speakers would be a passive Pioneer S-W33 Subwoofer (see photo) that is 8 ohms with duel speaker inputs.
If it is safe, do I run the Fisher 400 in 8 ohm or 4 ohm mode?
Thanks,
Mike
-
Hi Klipsch Fanatic
About 80 hours on the Sumiko Blue Point 2
The Fisher 400 is completely restored.
-
I have a Pro-Ject RM 5.1 SE Turntable that came with the Sumiko Blue Point 2 High Output Moving Coil Cartridge. I am going to be hooking it up to The Fisher 400 Tube Receiver. Would I be better suited with a Moving Magnet Cartridge? Should I buy something like the Ortofon 2M Bronze? Will there be a noticeable difference?
-
Without modifying the unit, is there a safe method to use a Fisher 400 just as a preamp without damaging the output transformer? I see it has a Speaker on/off switch. Does turning it to the "Speakers Off' off mode solve this issue?
Please no guesses, only reply if you're 100% certain. Hope I don't sound rude, just cannot risk damaging the unit. -
I am thinking about buying a Fisher 500 or Fisher 800
I see in pictures they have an single RCA Center Channel Output and Speaker Terminal Outputs.
Can I use the single RCA Center Channel Output for a powered Sub, and then run (4) speakers off the Speaker Terminal Outputs? -
wdecho,
Do I just enter 8 ohms? Or do the K-616K's and K-76-K's have different values?
And if I do L-Pads, if 15 watt okay, or should I spend extra for 50 watt or 100 watt?
-
I've been cleaning up a pair of Klipsch Quartet's that I'll be powering with my Amps & Sound Classic Wonder single ended 6B4G triode tube amp. The squawkers and tweeters both run too high in comparison to the woofers, and I'd like to reduce them by about 5dB. Currently I have a pair of Heresy II's that I'm using $89 ALK Engineering transformer tweeter attenuators (set a -5db). What value of resisters can I use to accomplish the exact same thing without spending $89 a set?
Thanks,
Mike
-
I bought a similar amp from Justin the Classic Wonder (single ended 6B4G) and really like it. Would be interested in hearing the Big Ben in pentode, to me the right distortion is sometimes good thing.
-
Came over to Justin's again last weekend and listened to these La Scala's on three different amps. A very highly modified pair of MKIII push pulls, a single ended EL84, and his 3/4 watt per channel Kenzie. Biggest surprise was how great they sounded on 3/4 watt per channel amp. Really good combination. Not sure what modifications have done, but they are a LOT better than the other La Scala's or Belle's I heard
-
1
-
-
Justin had me over a short time back, and I got to hear these amped by a McIntosh 2275 (KT88 tube like the 275). They sound simply amazing. Much better then either stock La Scala's or Cornwalls II's, or III's. Less harsh and mids were incredible with life like imaging. Wish my living room was larger. Klipsch should hire Justin and put these into production for $8-10k a pair. Go listen to them before you consider buying anything else.
-
Consider getting additional crossover from Bob Crite to biamp. Use your Carver SS on the woofers, and a modified Dynaco ST35 or ST70 on the Horns/tweeters. Really nice to be able adjust the level of both amps.
I also agree Justin who owns http://ampsandsound.com builds qualify stuff (has push pull or single ended). Also Holger the owner of http://www.tubenirvana.net stuff is great too (only build push pull amps). Both are guys you can trust. Costs a bit more then a used Dynaco.
If you go with biamp, you not need a lot of tube watts. Make sure to either pick a tube amp with a gain control or use RCA cable with a volume control. Though most audiophiles would argue these RCA's degrade the sound, I'd bet a lot of money in a blind listening they'd never know this type of RCA was used. They sell on Amizon for $15-20.
-
Well I'm opinion to any additional idea before I buy another amp.
-
Thanks to everyone for all the feedback.
As for the room, it is very challenging. I'm in a narrow tall condo,and the living room has two story high callings, plus a glass patio door. And, the mantle/shelf that my Heresy's are on is 12 to 18 inches higher then would be optimal. But it is home and what I have to work with.
-
Do low wattage Tube Amplifiers sound better then higher wattage Tube Amplifiers?
I am thinking the sound stage of my old rusty stock Dynakit ST70 sounded more three dimensional then my new highly modified Dynaco MKIII Monoblocks that has newer tubes and better everything else inside. Am I crazy?
I also talked to someone that swears the McIntosh MC225 sounds better the 240 or famously popular 275.
Plus I'm seeing a couple quality amp builders (tubenirvana.net and ampsandsound.com) selling some very low wattage amps.
Would love to hear some general opinions, as well as opinion on the best amps to pair with Heresy II and Forte II's for listening to in a condo at normal to lower volumes.
Last, say you're doing biamp configuration and only using the tube power to run squawkers/tweeters on Heresy II's or Forte II's, what's the ideal amp for that?
Cheers
Mike
-
I picked up a McIntosh MX2125 along with a McIntosh MX113. Currently I also own a McIntosh Mac4100.
I’ll be using the MX2125 to power Klipsch Heresy woofers, and a modified Dynaco ST-70 to power mids/tweeters (using a Y-cable, since there’s only one set of pre-outs).
Do I want to keep the MX113 to use as my preamp, or do I want to keep the Mac4100 and let if function as a preamp?
I’ll need to sell one of them, so I want to keep the one that will produce the best sound. Please share thoughts or opinions.
-
1
-
.JPG.a2048f27fc8c7b7452db4ea0efcf4752.JPG)
.JPG.199b67593d555f9785d725d500876cc7.JPG)
Klipsch Chorus II's with Bob Crites crossovers - $1,200 (Irvine, CA)
in Garage Sale
Posted
Cabinets and speaker grills are in presentable condition for their age. I found the Bob Crites crossovers are a nice upgrade. I do not have the factory risers. I replaced then rubber furniture feet. The sound incredible. I've used them with several different amps/receivers. They're currently hooked up to a push pull integrated EL-34 amplifier.
Happy to demo. Calling or texting is my preferred method of communication. No emails please. My mobile is 805-208-9713. LOCAL PICK UP ONLY!
They weigh 89 lbs each and I'm in an upstairs condo. You must be able to move them yourself. And I assume NO liability for injuries. Bring a dolly.