parlophone1
-
Posts
761 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by parlophone1
-
-
How far back on super MWMs can the K402s be positioned in active setup to compensate for delays using Xilica or DBX active crossovers?
-
How are Quantums compared to Klipsch, soundwise?
-
Looks good.
Is there any loss in sound quality when MWMs are positioned verticaly?
-
Do you have any idea why resistors went off?
-
The point of hearing difference in less efficient speakers seems true to me. Most of these talks comes to me from poeple with very inefficient small monitors.
-
1
-
-
I have heard a setup with Nova 300 in the system, but not with Heresies.
Nova is a fine amp and I would not hesitate to hook it up with Klipsch.
-
If you are having a laptop computer in your setup, there is a guy on www.thomann.de in the review section for Xilica that had a hum problem and how he solved that.
I would copy/paste it but it is difficult doing that on my old smartphone.
-
There are other practical issues.
One thing that poeple are faced with is they can not wipe their records with a brush on the plater before lowering the stilus. LP has to be wiped somehow before that.
-
1
-
-
The manufacturers of this TT is actualy close to me.
I have been following development od this, not closely but out of curiosity.
Early this year we had a chance to hear it playing music. This is not a "high grade" turntable. It usualy comes with entry level moving magnet cartridges. The audition was with Ortofon 2M black.
It had problems with stability of the plater when starting. Later on the plater went smothly, not wobling on axis.
Playbeck was ok, nothing to shout about.
It is cool looking, fancy and expensive toy. May be it will mature later.
-
2
-
-
Congratulations.
I suspect the HF drivers will behave a bit better after some houres of playing. At least few poeple reported such behaviour with new drivers, so this might be the case here.
How long have you been waiting for horns to arrive?
-
Concure on Cambridge.
Check also better phonos from ProJect. I was told they are pretty good for the money.
-
Congratulations, it is a very nice looking wristwatch.
I would hesitate to buy a watch that has to go to Japan (if I understood correctly) for servicing. But then again, who can get them nicely ticking if not the maker itself. Would worry though it does not get lost in transport.
My 4R36 movement would have to go for servicing every 3 years, but the salesman said that even 5 years would be ok.
-
6 minutes ago, Ziggurat said:
Then if I have to scrap them I won't feel so bad.
But why would you have to scrap them? Do them right the first time, and if you do not like them, just sell them.
-
Claude, what would you say are the most improvements comparing the first usable generations of digital cameras and today's cameras? Of course except the count of pixels.
Is it dynamic range, focusing...or something else?
For example, in DSLRs I find very usable to be able to fine-adjust focus of a particular lens, which is a negative design issue with all SLR cameras and probably one of important reasons for designing mirrorless.
-
So, now you are Sony guy 😊
I was thinking to get me one of these smaller mirrorless alphas, been thinking to buy the adapter for Nikkor lenses.
But then again, things in photo world are going fast and I am no professional. My old equipment satisfy my needs and unless something radically changes, I will not go for new.
-
Well the DOF appears shallow for sure on these photos ☺️
Almost as with my old manual Nikkor 135 f2,8
-
Beware, some of them (I mean banana plugs) can be of a peculiar dimensions.
I had Cambridge Audio on one of my cables sets and almost ruined a connector on my receiver because the banana was a bit too thick.
Trusted a reputable company and got a lemon. It should go smoothly in and sit tight in the connector.
-
If you would go for the look, then black should be as much as possible similar to the texture of the horns. Probably some kind of satin black. Or the opposite, paint in black (nothing to do with the Stones 😄) and put glass on horizontal surfaces.
I never had such beasts, but would glass rattle in these?
-
I do not see cleaning to be a problem.
What ever finish on the speakers, just do not use wet cloth because that way you are producing mud on the surfaces.
I would first vacuum clean and then dry clothed, preferably with cheap microfiber cloth. Do it every so often and the boxes should be clean enough.
-
Maggie Reilly
love her collaboration with Mike Oldfield.
-
Excuse me for hopping in, but if by " leave it or black in the openings" you mean to paint openings of bass bins in black and leave the rest of the boxes intact, I would go for that.
Having a two color combination, black 402s and black openings in bass horn would make a hansom combination.
-
1
-
-
17 hours ago, ClaudeJ1 said:
I remember going into a record store to see that most of the available CD's were $20, with a VERY limited choice, mostly classical. Meanwhile, you could buy an LP for $5.00, just to give you some perspective. Now, LP's cost $30-40 and CD's are about $10-15. What a world!!
Yes, now is a great time to buy CDs.
In 10-15 years we will probably face the situation that we have now with vinyl, the resurrection of CDs 🙂
-
Very windy, we remember such wind a decade ago.
Downed trees, roads are full of branches, garbage containers and all the junk that wind pick up and toss around.
Hope it will calm until the evening. Electricity breaks, public transportation works only in parts of the town.
-
It was a dome shaped hall made of concrete that serves as a venue for smaller concerts and bigger parties.
There is not much furniture. Only a DJ bridge at one part of the hall and the stage at the opposite. Walls are covered with wood panels.
The diameter of a hall is about 140 feet and the height at the apex of a dome was at around16-20 feet.
The rectangular console with synergy horn speakers was at 1/4 of a room.
TH subs were in front of SH speakers, maybe a few feet.
The audio rack with all the controls was placed at about 3/4 of a room opposite to the speakers.
We were listening one SH at a time, then with added TH sub(s). All sorts of music. Visitors had a chance to play their own music from whatever source.
In short, SH 96 sounded the best and was most tonally accurate. SH96 needed a sub only occasionally with deepest bass. All other SHs benefited the sub.
SH 46 sounded very sweet but not necessarily most accurate. All SHs sounded a bit hot in the treble.
If I had to choose to use or not to use the sub, I would play without it.
Poly-Cylindrical Diffuser and LF Absorber
in Technical/Restorations
Posted
Could you maybe elaborate on difference between the so cold BBC diffuser and the one that you have built? I have been thinking of fabricating the BBC kind to my requirements, but your diffuser nay be easier to build.