Alexander

Thank you for taking the time to share that story Awesome

I have always been under the impression that they were standard equipment.

Start with ~8-10 inches from the wall. Also experiment with a bit of toe in - I have found that having the intersect point to be just behind my seating position works the best. Your preference may differ. As practical as possible you want your seating position to be equal to the distance between the two speakers. So ideally if the spears were ten feet apart you would want to be ten feet away from each speaker.

Looks like you got it right - forte IIs – very good speaker

https://losangeles.craigslist.org/sgv/ele/d/west-covina-adcom-high-current-power/7160532954.html

https://ventura.craigslist.org/ele/d/santa-clarita-klipsch-klf-20-speakers/7158933992.html

https://losangeles.craigslist.org/wst/ele/d/torrance-klipsch-kg52-floor-speakers/7154996977.html

price is in the right neighborhood - price drop to $249 from $275 https://daytona.craigslist.org/ele/d/port-orange-klipsch-kg4-speakers-vintage/7154087014.html

https://boston.craigslist.org/gbs/ele/d/dorchester-center-beautiful-pair-of/7160271129.html

https://boston.craigslist.org/gbs/ele/d/somerville-klipsch-heresy-pair/7159099011.html

Price is a little high.... https://boston.craigslist.org/gbs/ele/d/melrose-klipsch-chorus-1-speakers/7150162190.html

Great little starter for someone setting up 2-channel https://houston.craigslist.org/ele/d/houston-marantz-51-surround-sound-home/7161082686.html

https://spacecoast.craigslist.org/ele/d/melbourne-klipsch-quartet-speakers/7161140926.html

The klf-30s already had two braces side to side, I had added two more braces from the motor board to the back pail in the same location. Maybe some loose polfill put behind the upper woofer, the lower cross brace will keep it from falling down into the bottom blocking the ports. The space between the two cross braces would occupy about one cubic foot factoring in the space the woofer takes up. And then there is the rest of the upper cabinet to consider, it would be a bit over another cubic foot. This is where we are looking for some feedback from fellow members that might be able to help us.

Not really trying to fix anything, just was thinking of experimenting. Have read how some members have used it and was asking if anyone had done this to klf30s (or 20s). If so they might give pointers that they had already tried. And if I did not like what it does one could easily reverse the possess.

https://dallas.craigslist.org/ftw/ele/d/cleburne-2-la-scala-loud-speakers/7160675713.html

Price is a bit out there....not sure I would want Ti's in the mids but that could be fixed. https://houston.craigslist.org/ele/d/houston-klipsch-klf-30/7160314403.html

https://orlando.craigslist.org/msg/d/orlando-klipsch-12-speaker/7140746784.html

OK, so we keep the factory foam is no problem. What about adding polyfill?

I was thinking of replacing the factory foam pieces with poly fill in a set of klf-30s. The question is how much and where to place it. Anyone already done this and if so what do you think of the out come?

Make sure that nothing can move around in your package and you will have won 90% of the battle.

https://cincinnati.craigslist.org/eld/d/cincinnati-klipschorn-speakers/7154793859.html

This is a steal for just the dra-1025ra - this was their flagship receiver – one of their best offerings in the late 80s early 90s. https://knoxville.craigslist.org/ele/d/kodak-vintage-denon-stereo-equipment/7144310236.html

https://washingtondc.craigslist.org/nva/ele/d/chantilly-marantz-2270/7158030692.html

Hmm, wonder what Deang's reasoning is?