Jump to content
The Klipsch Audio Community


  • Content Count

  • Joined

  • Last visited

Community Reputation

10 Good

About Fero

  • Rank
  1. @wvu80 @inMotionGraphics @billybob Thank you so much for all the help, I did an initial set up - Please see picture. 1. Should I move the woofers to two corners or should i move one behind the couch (give your suggestion on the best placement for the woofer) 2. Is the placement of the surround speaker good ? 3. Any other suggestions on the placement please
  2. One last question please, can i make my system a 5.2.2 then by adding an additional woofer. Will that make the system better, will my receiver support it and what are your thoughts on it ?
  3. You summarized it so very nicely for me. Thank you so much. This gives me a really good picture, I decided to return the extra atmos speaker and the center speaker to update to RP-504C and decided to keep the same receiver i have now. I will later buy a good receiver for sure
  4. I decided to return the extra atmos speaker and the center speaker to update to RP-504C and decided to keep the same receiver i have now. Thank you so much these suggestions were great. Can you please suggest me a good 25 feet plus HDMI cable and Jumper cable for my floor speakers please.
  5. The one i mentioned is the same one from costco, its just that costco has a different name for it. TSR-700 and RX-V6A are same
  6. No not yet just trying to see if the change will make sense or if i will really recognize the difference
  7. Yes as per all the suggestions I got, the below is going to be my system Receiver: Yamaha RX-V6A (2020 model)7.2-channel home theater receiver with Dolby Atmos - (This costed me $320 not sure if the jump to Marantz, Denon, Pioneer, Yamaha Aventage will make sense for me) Speakers KLIPSCH RP280FA DOLBY ATMOS FRONT SPKR (2) KLIPSCH RP-150M REFERENCE PREM.,CHERRY KLIPSCH R-112SW 12" POWERED SUB CHERRY KLIPSCH RP-440C REFERENCE PREM.,CHERRY (Will see if I can switch this to the RP-504C speakers) Wires: 100 feet of 14 gauge OFC wire Mediabridge banana plugs Mediabridge sub cable, RCA to RCA. @wvu80 Thank you so much for those suggestions. Guess I got everything needed hopefully.
  8. Those are some really great suggestions thank you so much. Sure i will try and see if i could change to the RP-504C and also i will go-ahead and order those wire and plugs. I was just browsing to see which one to order and right time you suggested those. One last help please can you please suggest a couple good receivers that i can possibly look into please.
  9. Great sure I always choose the used one, they are good value as you mentioned. So what receiver would you suggest me for this, I can possibly see if I can spend some extra money and exchange my current receiver.
  10. I have posted a link to my receiver, my receiver says its a 7.2 https://www.crutchfield.com/S-x3RY5C6f2eD/p_022RXV6ABL/Yamaha-RX-V6A-2020-model.html?XVINQ=MI5&XVVER=4MQ&awcr=76965946777206&awdv=c&awkw=yamaha RX v6A&awmt=e&awnw=o&awat=&awug=94504&msclkid=08e75bc752f910e0860c0408ecbe6e96 7-channel amplifier 100 watts per channel into 8 ohms (20-20,000 Hz) at 0.06% THD, with 2 channels driven Dolby® and DTS® surround sound decoding Dolby Atmos® and DTS:X™ processing for use with in-ceiling or "height" speakers for more enveloping home theater sound Dolby Atmos Height Virtualization creates three-dimensional effects without height speakers (via free future firmware update) Cinema DSP 3D adds richness and depth to music and movie soundtracks YPAO (Yamaha Parametric Room Acoustic Optimizer) automatic speaker calibration included microphone helps fine-tune your system to best match your room's acoustics R.S.C. (Reflected Sound Control) helps deliver smooth, well-balanced surround sound across different seating positions Music Enhancer improves sound quality of Bluetooth streams, MP3s, and other digitally compressed music files
  11. Thank you for the explanation this is helpful. I understood the 7 speakers so 7 but how is the .1 or .2 calculated ?
  • Create New...