Matthews Posted January 23, 2010 Share Posted January 23, 2010 I am running a pair of RF-7 with Adcom 5400 (125 wpc). Last night I picked up a Yamaha M-80 (250 wpc) on e-bay. Someone told me it would be a good idea to install an in line fuse going to the speakers. Is this something I need to consider? Where do I find what is needed (radio shack)? I will be using everything the amp will give and do not want to do any damage! Please help before my new Yamaha arrives. Thanks for you time. Quote Link to comment Share on other sites More sharing options...
Mike Dubay Posted January 23, 2010 Share Posted January 23, 2010 I'm not much for putting anything in line of the music that is not necessary. I would say that if the system sounds clean, and no noticable distortion is coming from either the speakers or the amplifier then I would believe you are ok. Generally you end up damaging speakers by driving an amplifer into distortion before you end up sending to much RMS music to the speakers. The RF7 are rated for 250Watts, so the yamaha should be a good match. Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted January 23, 2010 Share Posted January 23, 2010 Matt, It gets confusing when the same question is asked three times in different sections of the forum. It'll be a lot easier to read through the responses if they're all kept in the appropriate forum. [Y] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.