Storm AV Posted September 2, 2011 Share Posted September 2, 2011 Greetings from Down Under[H] Big thanks mate, your fix on the Sub 10 worked fine for me as a extra precaution I re-soldered all joints on the switch control board and all works fine. I did notice a slight hum before re-soldering the joints and this was gone after a half hour of iron work. One thing for others trying this fix keep the sub turned on when screwing the amp back into place as it may cut out again when tightening the screw to the right of the switches. I picked up the sub from a customer who replaced it after the failure-what a bonus! Quote Link to comment Share on other sites More sharing options...
superedge88 Posted September 3, 2011 Share Posted September 3, 2011 That is great to hear! I am happy to have helped. Enjoy some good quality inexpensive bass! Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted September 3, 2011 Moderators Share Posted September 3, 2011 Welcome, you can't beat that, now keep your eyes open for others with the same problem. [Y] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.