johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 The corners for me were the trickiest part, trying to align them exactly together without leaving a gap or crossing over one another, this was the one side I thought I got perfect. Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 old and new Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 First coat of poly done on one of the cabs. Shows how much of a difference it makes. Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 about the 4th coat of Poly Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 Also poly'd the backs and risers. Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 Original Klipsch cable side by side it's replacement Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 The new terminals just installed Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 All wired in Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 In a temporary break in setup hooked up to a pair of Threshold SA/6e's. Unfortunately the dust cap was dented in one of the woofers by the previous owner.... I still have yet to try a couple tricks in pulling it back out, but I'm considering Crites woofer's soon as well... We'll see! It truly has no affect on the sound to my ears for now. Once I fix up the grills, I wont have to worry about looking at it. Quote Link to comment Share on other sites More sharing options...
hklinker Posted January 29, 2013 Share Posted January 29, 2013 They look fantastic! Keep up the pics! Herb Quote Link to comment Share on other sites More sharing options...
moray james Posted January 29, 2013 Share Posted January 29, 2013 now that they are pretty on the outside are you planning any brace work for the inside or work on any of the drivers? Best regards Moray James. Quote Link to comment Share on other sites More sharing options...
johnstms92 Posted January 29, 2013 Author Share Posted January 29, 2013 I did have plans on changing out the old damping material, which after all these years is starting to crumble away at the touch, with some newer and thicker material, I have a couple options in mind. I also had plans on adding a layer of 3/4" MDF cut to the inside of the cabinet and a simple bracing done using a few 2x4's. These plans, however, have been put on hold at the moment as I am bringing in a pair of Infinity IRS Delta's into the house, and have some updates I want to do to them. The cornwall's will now be shifted over to my dad's main system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.