vnzbd Posted July 12, 2013 Share Posted July 12, 2013 I picked up a second set of KLF-10s and would like to refresh the crossovers. I did the previous set with a BC cap kit and also put in and Erse Super Q inductor, 1.5mh, 14 awg, .084 dcr in the woofer circuit and feel it improved the bottom end. After much reading on this site and others I am curious about the "air coil" option. The 10s cross over at 2.3k which is much higher than the typical 3-way and from I have read it appears that the higher the crossover the greater result you get from the air coil. For the lower freqs it appears to be more about dcr. The larger awg Northcreek air inductors are very close in dcr to the iron cores. So, for a 2-way speaker that crosses over at 2.3k iron or air core? It is pushed by a emotiva 200wpc, classic rock, blues and jazz. Thanks for the opinions Quote Link to comment Share on other sites More sharing options...
Deang Posted July 12, 2013 Share Posted July 12, 2013 If you match the DCR and inductance (as you should), you will hear absolutely no difference. Well, I can't. Quote Link to comment Share on other sites More sharing options...
vnzbd Posted July 13, 2013 Author Share Posted July 13, 2013 Thank you Dean. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.