Schu Posted October 22, 2013 Share Posted October 22, 2013 (edited) Emotiva USP-1 for sale... From a non-smoking, great condition... just a little dusty. fully functional, no issues. I only used this for it's Phonostage... never been used other than that. maybe less than 100 hours total. Remote is in prefect shape, I never used it except to try it out when it was first purchased. The only reason for the sale is that I moved to a Tube Phono Stage and SUT. Looking for $300 + $25 shipping. Features Precision low noise phono input with moving magnet or moving coil capability. Seven stereo inputs with precision instrumentation grade relay switching. Microprocessor controlled pure analog signal path. Milled aluminum full-function remote control. Gold-plated discrete RCA connectors for all inputs and outputs. Variable low pass / high pass filters - 12 dB /Octave slope. Tape output and tape input. 2.1 channel home theater bypass. Stereo / mono switching. Large format precision film volume potentiometer with motorized control. Headphone output. Illuminated input indicators (Halo Backlit). 12V trigger output. IEC power inlet, 120/230 VAC user configurable. AVR/Processor integration. 2.1 bass management system. Specifications Moving coil: 240 Ohm Moving magnet: 47kOhm Input impedance line in: 47K Ohm +/-5% Signal to Noise Ratio (rel 2V out): > 116 dB Distortion: < 0.005% 20Hz - 20kHz with 80kHz measurement bandwidth Frequency response: 5Hz - 80kHz, with less than 0.05 dB of deviation Line out freq. response: 5Hz - 80kHz, with less than 0.05 dB of deviation Maximum line out level: 9V RMS Ground floor noise level: > 20uV Channel separation @ 1kHz: > 80 dB (same as line) Built-in filters: High pass = variable 50Hz - 250 Hz @ 12 dB/Octave Low Pass = Variable 50Hz o- 250 Hz @ 12 dB/Octave, Summed L+R Mono Trigger Output: 12 VDC, 3.5mm jack, Center Pin is Positive / Current Load < 120mA Electrical Power Requirement: 115VAC, 60Hz or 230VAC, 50-60Hz User Selectable Size: unboxed: 17" wide x 4 1/16" high x 14 5/8" deep boxed: 22 5/8" wide x 8" high x 19 3/8" deep Weight: 13.2 lbs (19.8 lbs boxed) Edited November 3, 2013 by Schu Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.