wldrns1 Posted December 10, 2014 Share Posted December 10, 2014 (edited) The signal you would measure is AC volts and it's music so it will be bouncing all over the place making it impossible to get an accurate reading. Chances are the tuner has pretty much similar output as a CD player so 2 pairs would be the ticket. 2 pairs it is. Thx Craig. Edited December 10, 2014 by wldrns1 Quote Link to comment Share on other sites More sharing options...
Dr Morbius Posted December 10, 2014 Share Posted December 10, 2014 So Craig, since my Marantz CD player sounds good through my Scott amps you redid, did you put attenuators inside the amps? Quote Link to comment Share on other sites More sharing options...
NOSValves Posted December 11, 2014 Share Posted December 11, 2014 Like I stated "most" Scott amps..not all. The later models basically after the B versions don't have the problem. The 272 has per channel level controls, balance and a main volume control. So to answer your question no I did not install attentuation inside your amps. Quote Link to comment Share on other sites More sharing options...
Dr Morbius Posted December 12, 2014 Share Posted December 12, 2014 Oh, Ok!……….Thanks! Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.20a9f8a498efec38aee0c63bbad748f9.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.