fuzzydog Posted February 17, 2015 Share Posted February 17, 2015 I noticed that the Klipsch RB-61ii product page lists "none" under the mounting description. All the other RB series are identified as having 1/4" - 20 threaded inserts. Is the webpage wrong or does the RB-61ii's actually have no provisions to be mounted? Specs copied from the page below. Frequency Response: 45Hz-24KHz ± 3dB SENSITIVITY: 95dB @ 2.83V / 1m POWER HANDLING: 100W RMS / 400W Peak NOMINAL IMPEDANCE: 8 ohms compatible Low Frequency Driver: 6.5" (16.5cm) Cerametallicâ„¢ cone woofer HIGH FREQUENCY CROSSOVER: 1500Hz ENCLOSURE TYPE: Bass-reflex via front-firing port INPUTS: Dual binding posts / bi-wire / bi-amp HEIGHT: 15.4" (39.1cm) WIDTH: 8.5" (21.6cm) DEPTH: 12.3" (31.2cm) with grille WEIGHT: 35.2lbs (16kg) per pair MOUNTING: None FINISHES: Black Ash woodgrain vinyl Built From: 2010 Quote Link to comment Share on other sites More sharing options...
Fizik Posted February 17, 2015 Share Posted February 17, 2015 Website is correct. There is not mounting bracket on the back of the larger models. Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted February 17, 2015 Author Share Posted February 17, 2015 Website is correct. There is not mounting bracket on the back of the larger models. What about threaded inserts on the bottom? Quote Link to comment Share on other sites More sharing options...
Fizik Posted February 17, 2015 Share Posted February 17, 2015 (edited) Mine don't appear to have any on the bottom either. Odd that the 6.5 in models didn't get those. Edited February 17, 2015 by Fizik Quote Link to comment Share on other sites More sharing options...
violetgrey Posted February 17, 2015 Share Posted February 17, 2015 Where are you thinking about mounting them? Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted February 17, 2015 Author Share Posted February 17, 2015 I don't own any yet, but I was thinking about picking up pair at the current model closeout pricing. Not having any way to mount them might be a deal breaker. I guess you'd have to drill your own holes if you wanted to attach them to stands or a bracket??? Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted February 17, 2015 Author Share Posted February 17, 2015 Has anyone attempted to attach these to a wall by drilling their own holes into the cabinet? Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted February 18, 2015 Moderators Share Posted February 18, 2015 These are both sold but this is what you are looking for to mount them. I used them before to safely mount the much larger RB-35's and they are fantastic. https://community.klipsch.com/index.php?/topic/155108-sold-pinpoint-am40-btech-bt77-side-clamping-speaker-mounts-sold/ Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted February 18, 2015 Author Share Posted February 18, 2015 Those look like they'd be perfect. Thanks for the reply Youth! Regards, Fuzzy Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted February 18, 2015 Moderators Share Posted February 18, 2015 Glad to help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.