FS:Yamaha P2500S amps

[NBPK402]

I have 4 of them that I no longer need... I switched to a Lexicon 5 channel, and a Sherbourn 5 channel amp. 

 

One of them is in mint condition (I believe it is the one i have the factory box for). The other 3 have scratches on the top of the case. All of them work fine, and look good when they are in a rack. I am looking to get $300 for the one that is in mint condition, and $250 each for the other 3. If you buy multiples the price will come down. 

 

tia,

Ron

 

Specs are as follows:

 

http://www.yamahaproaudio.com/global/en/products/poweramps/ps_series/specifications.jsp

 

100V models P2500S Dynamic power; 1kHz 20ms nonclip 2ohms 650W x 2 4ohms; Bridge 1300W Output power; 1kHz 4ohms 390W x 2 8ohms 275W x 2 Output power; 20Hz-20kHz 4ohms 310W x 2 8ohms 250W x 2 8ohms; Bridge 620W 120V models P2500S Dynamic power; 1kHz 20ms nonclip 2ohms 650W x 2 4ohms; Bridge 1300W Output power; 1kHz 4ohms 390W x 2 8ohms 275W x 2 8ohms; Bridge 780W Output power; 20Hz-20kHz 4ohms 310W x 2 8ohms 250W x 2 8ohms; Bridge 620W 230V models P2500S Dynamic power; 1kHz 20ms nonclip 2ohms 650W x 2 4ohms; Bridge 1300W Output power; 1kHz 4ohms 390W x 2 8ohms 275W x 2 8ohms; Bridge 780W Output power; 20Hz-20kHz 4ohms 310W x 2 8ohms 250W x 2 8ohms; Bridge 620W 240V models P2500S Dynamic power; 1kHz 20ms nonclip 2ohms 650W x 2 4ohms; Bridge 1300W Output power; 1kHz 4ohms 390W x 2 8ohms 275W x 2 8ohms; Bridge 780W Output power; 20Hz-20kHz 4ohms 310W x 2 8ohms 250W x 2 8ohms; Bridge 620W General specifications P2500S Total harmonic distortion Less than 0.1% (20Hz-20kHz; Halfpower), RL=4ohms Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower) Frequency response +0dB, -1.5dB (RL=8ohms, 20Hz - 50kHz) S/N ratio 100dB Power band width 10Hz-40kHz Crosstalk Less than -70dB Damping factor More than 200 Voltage gain 32dB Input sensitivity +3dBu I/O Connectors Line input / output ports 2x XLR-3-31, 2x 1/4"TRS phone jack Speaker output ports 2x speakON, 2x 5-way binding post, 2x 1/4"Phone jack Processors HPF/LPF (25Hz-150Hz sweepable, 12dB/Oct), YS Processing Protection circuit Load protection Power switch on/off mute; DC-fault (power supply shutdown) ,Clip Limiting(THD≧0.5%) Amplifier protection Temp. detection (Heat sink temp ≧90°C) (Operation not restored automatically), VI limiter (RL≦1ohm) Amplifier class EEEngine Cooling Variable-speed fan Power requirements Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz Power consumption Music source equivalent 320W Idling 25W Dimensions W 480mm; 18-7/8in H 88mm; 3-7/16in (2U) D 456mm; 17-15/16in Net weight 14kg; 30.9lbs Accessories Owner’s manual, Security cover (with a hex wrench)

Edited July 27, 2015 by ellisr63