teknoid Posted November 7, 2015 Share Posted November 7, 2015 Does anybody know what the DCR of the 2.5mH inductor used in the Type E dividing network is? THANX! Quote Link to comment Share on other sites More sharing options...
moray james Posted November 8, 2015 Share Posted November 8, 2015 if you don't have a meter to measure it you could ask if there is a local to you member who does or simply visit your local electronics supply shop who does and measure it there. good luck. Quote Link to comment Share on other sites More sharing options...
teknoid Posted November 8, 2015 Author Share Posted November 8, 2015 I am not currently in possession of a 2,5mH Klipsch inductor so discussion of what kind of meter it takes to measure it is kind of pointless. I do have a decent meter. It's an old (OK... very old) Archer dating from the days that they were being build by one of the leading DVM makers under contract to Radio Shack. I'm trying to find out the DCR to plug that number in to some crossover calculations I'm working on. Quote Link to comment Share on other sites More sharing options...
BEC Posted November 8, 2015 Share Posted November 8, 2015 OK, I just measured one for you. 0.380 ohms. Measured with a B&K Model 885 using Kelvin leads. Bob Crites 2 Quote Link to comment Share on other sites More sharing options...
WMcD Posted November 9, 2015 Share Posted November 9, 2015 Nicely done, Bob. WMcD Quote Link to comment Share on other sites More sharing options...
teknoid Posted November 9, 2015 Author Share Posted November 9, 2015 OK, I just measured one for you. 0.380 ohms. Measured with a B&K Model 885 using Kelvin leads. Bob Crites Thank you sir! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.