jjptkd Posted November 9, 2016 Share Posted November 9, 2016 So, I was digging through the archives yesterday looking at all the various mid drivers / horns and their crossover frequencies and noticed something odd about the kp-201. In the specs listed the crossover points are 550hz and 6khz but the 201 uses a k-701 mid horn, I'm just wondering if this is a typo? Everything else appears to be accurate. https://web.archive.org/web/20130527170902/http://www.klipsch.com/kp-201 SPECIFICATIONS BUILT FROM: 2001 BUILT UNTIL: 2004 COVERAGE ANGLE: 90(o) Horizontal x 60(o) Vertical CROSSOVER FREQUENCY: 550Hz and 6kHz DIMENSIONS: 21.8" (55.4cm) x 15.875" (40.5cm) x 13.25" (33.6cm) DIRECTIVITY INDEX: 8dB (+-)2dB FREQUENCY RESPONSE: 60Hz - 20kHz(+-)4dB (-10dB @ 43Hz) @ 3 meters, 1/2 space anechoic INPUT CONNECTIONS: Red/black five-way binding posts and Neutrik Speakon(r) NL-4 MAX CONTINUOUS OUTPUT: 115dB NOMINAL IMPEDANCE: 8 ohms, 4.5 ohms minimum at 550Hz POWER HANDLING: 100 watts (23.7V) SENSITIVITY: 97dB @ 2.83V, 1 meter, 1/2 space anechoic WEIGHT: 38 lbs. (17.3kg) Quote Link to comment Share on other sites More sharing options...
OO1 Posted December 6, 2023 Share Posted December 6, 2023 @jjptkd Jesse ,I fell on this old thread , so why not answer it , the specs shown above are indeed a typo , the crossover frequencies of a KP-201 and KP-201 II are 700Hz / 7KHz Here are the Specifications for a KP-201 Frequency response (Hz): Crossover frequency: 700 Hz w/ 12 dB/octave roll-off (woofer &. midrange), 7000 Hz w/ 18 dB/octave rolloff (tweeter), KLiP circuit tweeter protector Component.: Woofer K-24-K 12-lnch (30 cm) w/ water-proofed cone Midrange: K-53-K 1.5-lnch (3.8 cm) compression driver Tweeter K- 76-K I-Inch (2.5 cm) compression driver Input connectlons : Parallel locking Neutrlk D-shell 1/4-ln. phone Jack and parallel red/black five-way binding posts, Input Is fused (2 A r~ommended), Enclosure: 3/4-lnch (19 mm) 9-ply void-free plywood. Internally braced ~ lined with acoustical foam. Metal grille. Dimensions (without trlm): 21 13/16" (55.4 cm) H, 15 15/16" (40.5 cm) W, 131/4" (33.6cm) D Weight, Ib5. (kg): 38 (17.3) net, 52 (23.6) shipping Here are the specs of the KP-201 II Power Handling: 125 Watts* (21 V) Maximum Continuous Output @ 1 Meter with Full Power Input: 116 dB SPL Dispersion Angle: 90° Horiwntal x 40° Vertical Directivity (Q): 8.1 Directivity Index: 9.1 Sensitivity @ 1 Watt/1 Meter (2.83 V): 96 dB SPL Nominal Impedance: 8 Ohms (4.5 Minimum @ 550 Hz) Crossover Network: 700 Hz, 12 dB/Octave, 7000 Hz, 18 dB/Octave Drive Components: LF: K-22-KP 12" (300 mm) Woofer MR: KP-66-E (50 mm) Titanium Compression Driver HF: K- 762-KP (25 mm) Compression Driver Input Connections: Red/Black Five-way Binding Posts and Neutrik Speakon~ NL-4 Height: 2113/16" (55.4 cm) Width: 15 7/S" (40.5 cm) Depth: 13 1/4" (33.6cm) Weight: 381bs. (17.3 kg) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.