Ashourka Posted January 7, 2017 Share Posted January 7, 2017 What will be the best setup for Dolby Atmos for a room with this dimension: L: 23 foot W: 20 foot H: 10 foot Quote Link to comment Share on other sites More sharing options...
Ashourka Posted January 13, 2017 Author Share Posted January 13, 2017 I am planning for one pair of rp280fa, rp450ca, r115sw and 4 rp250s. Will this be okay. Do I need ceiling speaker? Quote Link to comment Share on other sites More sharing options...
BusaDude Posted January 15, 2017 Share Posted January 15, 2017 You can set your system up however you like, but the whole point of a Dolby Atmos setup is for overhead effects/sounds. Lots of different speaker arrangements... 5.1.4, 7.1 4, 9.1.6, etc. https://www.dolby.com/us/en/guide/dolby-atmos-speaker-setup/index.html Quote Link to comment Share on other sites More sharing options...
sabeous Posted January 15, 2017 Share Posted January 15, 2017 Which Receiver will you be using to power Atmos? After Onkyo purchased Pioneer I think they have the edge for the 3100 or 3030 receivers. You can pick up a 3030 for about $1500 and it has multiple DAC's built in if you want to bypass all things digital and hear two channel for music. I know someone else might feel different but it is a great receiver that can produce some amazing sound - simple or complex. The system you mention is a 7.1.2 configuration - why not go for the 7.1.4 version instead? I use 7.1.4 and think it is great for movies - the receiver has enough certifications to make your head spin - it will light your speakers up however you want them. I would strongly encourage 7.1.4 - you'll regret it if you go with 7.1.2 - why not have full height effect? One last consideration is your sub. I have never had a ton of luck with Klipsch subwoofers - if you can stretch for a Velodyne subwoofer it would be money well invested. Audioholics recently reviewed subwoofers and has some clear recommendations based on room size. Given you have 4600 cubic feet - you'll need some power. Good luck on your system build - share a photo or two when you get it up and running! Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted January 15, 2017 Share Posted January 15, 2017 1. Go on ebay, buy up a pile of old Bose "cubies" or Anthony Gallo-types and pepper the ceiling with them. 2. Spend a fortune on trying to wire them all up...cosmetically if possible. On a serious note... There is no such thing as "Best" where Dolbly Atmos is concerned. The real magic lies in its high bandwidth, object-orientated signal encoding and processing. Not littering a room with as many speakers as possible. 1 Quote Link to comment Share on other sites More sharing options...
derrickdj1 Posted January 15, 2017 Share Posted January 15, 2017 17 minutes ago, Quiet_Hollow said: There is no such thing as "Best" where Dolbly Atmos is concerned. The real magic lies in its high bandwidth, object-orientated signal encoding and processing. Not littering a room with as many speakers as possible. So true. Some Dolby Atmos films will be great and other not so great. Many of the Pioneer's also have double DAC. The standing wave correction feature is a major plus for MCACC Pro. Dolby Atmos is a nice feature but, it is just a small increment in the over picture of a good HT setup. Systems without Dolby Atmos are not obsolete and can easily give a great sound presentation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.