Jump to content
The Klipsch Audio Community
Matrixx9

Receiver/amp setup Please help!

Recommended Posts

I am not being lazy. I have read the manual,  I have read the yamaha forums and although I have found the right topics, the posters talk way over my head. 

Here goes I, at the present moment  have a Yamaha RX A1070--- 7 amps/nine channels. I'm enclosing a pic of the rear.

I finally scraped enough to get an Emotiva 5 channel amp that from what I read was going to fix my problems.  

My setup is as follows...

FRONT L PRESCENSE  FRONT R PRESCENSE 

L C R

SUR L SUR R

REAR SURR L SURR

IN THE REAR OF the receiver the pre outs have rear surround as EXTRA spkr 1

And front prescense as EXTRA spkr 2

My problem WAS...while playing music OR movies my rear surrounds would not play while my front prescense would. 7 channels 7 amps.

So I read on all forums an external amp with at LEAST 2 channels would fix the problem.

Nope ..not for me

I get a 5 channel which sounds great and all but still no rear surrounds unless I do the test tone. And although a noob,  yes I checked all wiring before many times. I also know they are connected properly because they play loud and clear on the Yamaha setup/manual.. on screen settings. What setting do I put it on to hear my rear surrounds??? Does anyone here know how to explain this to a dummy???

Thanks ahead of time..seriously i love you guys!

Randy

 

 

Screenshot_20200114-132241_Chrome.jpg

Share this post


Link to post
Share on other sites

For the record I connected the L C R and left and right surrounds as my 5 channels hoping, praying that now that 5 channels/amps taken from the Yamaha would have run my "extra" speakers  but nope. The only way I can get my rear surrounds to produce sound is when I set the Yamaha to neo6 which makes the rest of the speakers drop considerably. 

Share this post


Link to post
Share on other sites

It sounds like a setting on the Yamaha isn't set right, or you're not playing content that would send a signal to the rear surround channels. Is there a 7 channel stereo setting on the AVR? Does that include the rear surrounds? Sometimes in movies, the content sent to the rear surrounds has so low content, we hardly hear anything. I take it this AVR isn't Dolby Atmos enabled? 

  • Thanks 1

Share this post


Link to post
Share on other sites

Yes sir it is Dolby atmos enabled Ceptorman. I usually use the Dolby surround setting. When I try 7 channel stereo is when I would expect to hear the rear..  but I hear zero volume. Like I said I can hear it only when i put it on neo6 whatever the heck that is but the rest of the speaker take a majority power hit. Almost like a 30db power cut mute button would do. I have to RF82's as my rear surround and it is basically unused. I will say this though. The addition of the amp make my front soundstage sound and feel like I'm in front if a freight train. I had never really heard my beloved Klipsch before. Thanks for the help Ceptor!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...