SunnyDelight Posted April 1, 2020 Share Posted April 1, 2020 (edited) Greetings Forum. I am a new to Klipsch and home audio and would like some feedback. Audyssey crossed the soundbar channel at 110hz and set the Bass to LFE plus Main. Looking to get best optimal crossover setting for the soundbar and subwoofer. My setup below Klipsh Heritage Theater Sound Bar with the following factory spec: FREQUENCY RESPONSE 95Hz – 20kHz +/– 3 dB, –10db @ 75Hz CROSSOVER 2,800 Hz Klipsh C308aswi subwoofer with the following factory spec: FREQUENCY RESPONSE 28Hz - 150Hz +/- 3dB Receiver: Marantz 1710 Edited April 1, 2020 by SunnyDelight Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted April 1, 2020 Share Posted April 1, 2020 Looks perfect. Quote Link to comment Share on other sites More sharing options...
SunnyDelight Posted April 1, 2020 Author Share Posted April 1, 2020 (edited) Great. I contacted Klipsch and the technical staff wanted me to change the crossover to 80hz and set the subs to LFE and at 80. I think they may stress the drivers Edited April 1, 2020 by SunnyDelight Quote Link to comment Share on other sites More sharing options...
willland Posted April 1, 2020 Share Posted April 1, 2020 2 hours ago, SunnyDelight said: Great. I contacted Klipsch and the technical staff wanted me to change the crossover to 80hz and set the subs to LFE and at 80. I think they may stress the drivers Start at the 110Hz and listen to see if you hear dialog coming from the subwoofer. If you do start dropping down from there. Welcome to the forum. Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.