Alexander Posted April 15, 2020 Share Posted April 15, 2020 Would like to replace the stock binding posts on my forte II's, KLF's & T5000's to something better. What have any of you gone to that was as close to a direct replacement as possible? They most certainly do not need to be anything fancy. Just would like to replace the el-cheapo plastic nut type and hopefully still fit under a factory crossover PCB. Quote Link to comment Share on other sites More sharing options...
vulcan Posted April 18, 2020 Share Posted April 18, 2020 I replaced the stock binding posts on my Forte II a few years ago at the same time I was doing a recap on the crossovers. Used the Mini Gold Plated Insulated 5-Way Binding Post Banana Jack Set from Parts Express. There is very limited clearance on the rear of the plate. These worked out very well for me. 3 Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 18, 2020 Share Posted April 18, 2020 - Quote Link to comment Share on other sites More sharing options...
Alexander Posted May 7, 2020 Author Share Posted May 7, 2020 On 4/17/2020 at 11:14 PM, vulcan said: I replaced the stock binding posts on my Forte II a few years ago at the same time I was doing a recap on the crossovers. Used the Mini Gold Plated Insulated 5-Way Binding Post Banana Jack Set from Parts Express. There is very limited clearance on the rear of the plate. These worked out very well for me. Thanks vulcan, got them on order now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.