wvuvt1 Posted April 9, 2023 Share Posted April 9, 2023 (edited) Well, have set up 2.1 in the past but no dice this time. I have a parasound new classic 200 preAmp and the noted above subwoofer. I must be doing something wrong with the crossover ideally would like to use the crossover on the pre amp pics attached starting from scratch as I tried every combination for <80 hz, full range to the sub. I am using a single RCA cablefor the back of each Edited April 10, 2023 by wvuvt1 More detail Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted April 10, 2023 Share Posted April 10, 2023 Well, obviously you need to connect RCA interconnects to the subwoofer inputs. 😄 Also, turn the low pass knob on the sub as high as it can go. Turn the power switch on the sub to On/Auto. Connect the RCA cable from the 80Hz output in the pre-amp to the L/LFE input on the sub. Also make sure the pre-amp subwoofer output is set to On. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.