netnut Posted May 9, 2003 Share Posted May 9, 2003 Should I have to change my sub settings when going from the Klipsch R3 speakers to the R7'S? Thanks to all responders Quote Link to comment Share on other sites More sharing options...
Danartdis Posted May 9, 2003 Share Posted May 9, 2003 Netnut, My guess is that since the RF-7 goes deeper with authority, you might want to crossover a little lower if you have the flexibility to do so. I am confident you will get many more comprehensive responses here soon. (That is quite some system) Quote Link to comment Share on other sites More sharing options...
fabulousfrankie Posted May 9, 2003 Share Posted May 9, 2003 You'll definitely need to recalibrate the level of the subwoofer because the RF-7's are more efficient. Quote Link to comment Share on other sites More sharing options...
TheEAR Posted May 9, 2003 Share Posted May 9, 2003 As a HGS18 owner and RF7 fanatic I will chime in Depending how your mains are set(small or large)you may need to change the crossover point. If you run your mains in LARGE lower the crossover on the HGS by 10-20Hz. If you run your mains in SMALL mode just raise the leven on the sub or the level in the pre/pro sub setup. Quote Link to comment Share on other sites More sharing options...
netnut Posted May 9, 2003 Author Share Posted May 9, 2003 ---------------- On 5/9/2003 4:57:00 PM Danartdis wrote: Netnut, My guess is that since the RF-7 goes deeper with authority, you might want to crossover a little lower if you have the flexibility to do so. I am confident you will get many more comprehensive responses here soon. (That is quite some system) ---------------- Thanks Dan Quote Link to comment Share on other sites More sharing options...
netnut Posted May 9, 2003 Author Share Posted May 9, 2003 ---------------- On 5/9/2003 9:03:45 PM fabulousfrankie wrote: You'll definitely need to recalibrate the level of the subwoofer because the RF-7's are more efficient. ---------------- Thanks Frankie Quote Link to comment Share on other sites More sharing options...
netnut Posted May 9, 2003 Author Share Posted May 9, 2003 ---------------- On 5/9/2003 10:18:44 PM TheEAR wrote: As a HGS18 owner and RF7 fanatic I will chime in Depending how your mains are set(small or large)you may need to change the crossover point. If you run your mains in LARGE lower the crossover on the HGS by 10-20Hz. If you run your mains in SMALL mode just raise the leven on the sub or the level in the pre/pro sub setup. ---------------- Thanks EAR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.