Boji7.1 Posted January 9, 2005 Share Posted January 9, 2005 I have a RW-12 and was wondering which input should I use the LFE or the red and white connection. I am using a H/K avr-235 to power everything. Quote Link to comment Share on other sites More sharing options...
Noloft Posted January 10, 2005 Share Posted January 10, 2005 The only thing I can tell you is if you use the single lfe input, you bypass all internal signal processing on the sub. If you use the left and right (red & white line in) inputs, all signal processing, phase 0-180, crossover 40 to 120 hz, works as you have them set on the rear of the sub. I use the lfe inputs and control the sub through the preamp in my system. Hope that helps, Noloft Quote Link to comment Share on other sites More sharing options...
Enigma Posted January 10, 2005 Share Posted January 10, 2005 How come Klipsch says that with the red and white connector you can get "enhanced" sound? Thats the paper I got inside the box when I first opened it. -ant Quote Link to comment Share on other sites More sharing options...
IAmtnbikr Posted January 10, 2005 Share Posted January 10, 2005 Not sure on yours; but on the KSW I had you could get a 3db (?) gain by using a Y connector on the end of the sub cable an running it to the two inputs vs the LFE only. Quote Link to comment Share on other sites More sharing options...
gcoker Posted January 10, 2005 Share Posted January 10, 2005 I connect mine using the LFE input. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.