Huston Posted January 14, 2005 Share Posted January 14, 2005 Hey guys, I'm looking for some help, I'm relativley new to DIY and wanna start it all off by creating a few surrounds for my HT. I'm trying to model after RB-15's I have the exact K-1130-AB 5.25" drivers but need some help with schematics and creation of a 2.8Khz-ish crossover. I was also looking at some replicated horn tweeters and found selenium on parts express has a similar looking one to that of Klipsch... Any and all help would be greatley appreciated! Scott Harman Kardon AVR 235 Klipsch RB-3 Klipsch RC-3 Quote Link to comment Share on other sites More sharing options...
3dzapper Posted January 14, 2005 Share Posted January 14, 2005 There is a primer on x-overs at Parts Express: x-over. Rick Quote Link to comment Share on other sites More sharing options...
Huston Posted January 15, 2005 Author Share Posted January 15, 2005 right but I want it to be as close to the real crossover as possible? Any Schemers out there? Quote Link to comment Share on other sites More sharing options...
STL Posted January 15, 2005 Share Posted January 15, 2005 On 1/15/2005 12:54:54 AM Huston wrote: right but I want it to be as close to the real crossover as possible? Any Schemers out there? You should be aware that since you'll be using a different horn, you probably do not want to model the HP section of your crossover exactly like the Klipsch network. Also, Klipsch doesn't release schematics for their newer speakers -- only their old stuff. Quote Link to comment Share on other sites More sharing options...
Huston Posted January 15, 2005 Author Share Posted January 15, 2005 OK OK OK I've scraped the idea of picking up the original 5.25" woofers. Can anyone help me model some surrounds that are horn loaded and can somewhat fit in with my klipsch system? I dont want them to sound too far off.... Thanks everyone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.