48n123w Posted August 12, 2007 Share Posted August 12, 2007 I'm considering a McIntosh MC 7108 for my 5 channel HT (Fronts RF-7, RC-7, Rears RF-5). From my research I believe this 8 x 40 amp can be configured a few ways. Which option would be best for my setup? 1) 8 x 40W2) 3 x 100W + 2 x 40W3) this amp is wrong for me thanks for your input! Quote Link to comment Share on other sites More sharing options...
Doc Robin Posted August 12, 2007 Share Posted August 12, 2007 Hello: The option that sounds best to you. Way too many variables in the equation that only you can determine which is right for you. Hopefully your dealer will let you test drive the Mac in your home. Later Billl Quote Link to comment Share on other sites More sharing options...
48n123w Posted August 12, 2007 Author Share Posted August 12, 2007 maybe I should rephrase... Would option 1 be enough power for the 7's?Is option 2 even a good idea, ie) sound way out of balance? Quote Link to comment Share on other sites More sharing options...
SilverSport Posted August 12, 2007 Share Posted August 12, 2007 hopefully the RF-7 owners will chime in here but many of them have reported in the past that MORE than 100w need to course through the RF-7s for best results...I know of at least one that said going from a 100w to a 200w per channel HT amp said there was a BIG improvement in overall sound (opened up) Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.