kg4guy Posted March 12, 2008 Share Posted March 12, 2008 I have new Solen inductors for my crossovers in my Heresy II's and was wondering because they are not going to fit on the crossover terminal cup , I had to mount them on the bottom of the speaker cabinet and need to run about 4 inches or wire from the inductors to the crossovers what type of wire can I use to go from the new inductors to the crossover board? Thanks Quote Link to comment Share on other sites More sharing options...
Deang Posted March 12, 2008 Share Posted March 12, 2008 Why don't you build up new boards? I like the Supra Classic 1.6 from Madisound http://www.madisound.com/catalog/index.php?cPath=117_122 Quote Link to comment Share on other sites More sharing options...
G.Kennedy Posted March 12, 2008 Share Posted March 12, 2008 You could build them to be like my KP2.0A's which are in my KP201's. Very similar crossover .... but instead of on the input cup, it is mounted on a board like others in the Heritage line. Then screwed to the side wall. Quote Link to comment Share on other sites More sharing options...
kg4guy Posted March 12, 2008 Author Share Posted March 12, 2008 Thanks Dean I may just do .Do you need to use the same gauge wire as the inductor is from the inductor to the crossover? Quote Link to comment Share on other sites More sharing options...
Deang Posted March 12, 2008 Share Posted March 12, 2008 No, not at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.