Fizzlemizzle Posted July 9, 2008 Share Posted July 9, 2008 Hi, i'm posting my questions in this folder since I got no responses in the subwoofer folder. I'm going to be installing a subwoofer in my car and I have somequestions you guys should be able to answer. I'm going to be getting this subwoofer(http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=295-468)and i'm wondering if a 1.5-2.0 cubic foot box would be big enough andalso if you would recomend going sealed or ported. Would sealed reducerattle because less air is moving around? What effect would too smallof a box have on it? All responses are very appreciated. Thanks inadvance Quote Link to comment Share on other sites More sharing options...
fenderbender Posted July 9, 2008 Share Posted July 9, 2008 I'm not speaking for anyone else here but you may get good advice from some of the car-tech forums.....when I had a Mitsubishi EVO I was on a forum and they had several sections dedicated to car audio by specific model.....soooo if you don't get any help here that may be a good route. Quote Link to comment Share on other sites More sharing options...
Daddy Dee Posted July 9, 2008 Share Posted July 9, 2008 A couple of thoughts. I'd suggest to browse the consumer reviews for this sub on partsexpress. These folks have used this sub in cabs from 2.0 to 4 cu ft. I've found the parts express tech support folks helpful. They probably have some specific recommendations or could direct you to them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.