Dieter

Hi Duke, i think, that this pix is not yours, it is mine! I have made it before some years in MY room! Dieter from Germany

Andy! THANK YOU VERY, VERY MUCH!!!!! Grettings from Germany Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hi Andy, great, thank you very much!!! Regards Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hi, In my new home i will have no place for the klipschorn bass, so i decided to builed another enclosure with the K33E. I think the best for me is the cornwall. That's my question: can anybody tell me the volume ( inner dimension) of the cabinet and the dimensions oft the vents(s). Thanks Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Thanks justin_tx_16 for the photos! But do you have the inside dimensions of the cornwall and the dimensions of the vented port(s), because i want to DIY the cornwall with the K33E from the Khorn. Regards Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hi, In my new home i will have no place for the klipschorn bass, so i decided to builed another enclosure with the K33E. I think the best for me is the cornwall. That's my question: can anybody tell me the volume (dimension) of the cabinet and the dimensions oft the port(s). Thanks Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hi, I've send you the A, AA, AL3 splitted schematics. Look at your mail. Dieter ------------------ Bass: Klipschorn MidsHighs: TAD 4001 + 22" Horn SuperHigh: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Justin! Here is alink for Lascala plans. Dieter http://baseportal.de/cgi-bin/baseportal.pl?htx=/Data/exdreamaudio/bauplaene_forum&db=bauplaene&cmd=list&range=0,20&cmd=all&Id=8 ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D586 MidsHigh: Fostex H425 + Fostex FD600 High: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hi 12ax7! It was a long way to this combination with the Fostex: in 1980 I built first the LaScala with with the K33E and a copy of the k400 and the EV T35 (a diy-set from the Swiss ACR), but the bass was not deep enough for me. The result: building the K-horns. I've got the plans from a guy, who had destroyed a Klipschorn to get the right plan. In 1992 I bought a used LaScala (Original) for cheap price and put these drivers and crossovers in my K-Horn. It sounds good, but I never was satisfied about the mids/highs. Then I read about the ALK-Xover and bought them. It was a very good improvement and Al made a good job, but some month later I've heard the Fostex combination and was surprised of the sound of these speakers ("that's it!"). I rememberd me, that ACR sold in the 80s a "State of the Art"-Model of the K-Horn with Fostex-Components. But how to get the horns and drivers. ACR does not made the importor for the Fostexs anymore, and these Fostex drivers were not in production by Fostex. I#ve tried to get them used, and there was a way to get them: EBAY. My first Fostex wooden horn was the H325 with the D450 and the T825 with the ALK Xover. Really good. Then I've got the H220 with D221: better!! Then the T925: better, but the ALK doesn't match this Combi. I've got the Pioneer D-23: very good!! Then D586, that's it!! Now I'm triing the H425 with FD600, because there is a little lack between 5000 and 7000Hz ( The T925 sound really good from 7000 Hz). My next try is a JBL 2402, I will try it for the H425+FD600 , the T925 will be a supertweeter from 12000Hz. It is very difficult to discribe the sound, because I havent the right english words, but it sounds better for ME than the Klipsch Mids/highs. If I get JBL 2440/1 I will try them too, but they are very expensive and very rare in Germany, perhaps I will get them for a reasonable price. That's the story! It will never ends! ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D586 MidsHigh: Fostex H425 + Fostex FD600 High: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Soory, the first link is wrong. Here it is: http://baseportal.de/cgi-bin/baseportal.pl?htx=/Data/exdreamaudio/bauplaene_forum&db=bauplaene&cmd=list&range=0,20&cmd=all&Id=8 Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D586 MidsHigh: Fostex H425 + Fostex FD600 High: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Here is a link: http://baseportal.de/cgi-bin/baseportal.pl?htx=/Data/exdreamaudio/bauplaene_forum&db=bauplaene&cmd=list&range=0,20&cmd=all&Id=6 Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D586 MidsHigh: Fostex H425 + Fostex FD600 High: Fostex T925 X : active (Pioneer D-23) Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 : Quad 303 CD : Marantz CD 73

Hey guys, I need infos about ACOUSTICIAN MODEL 1272 8A. Does anybody know these mid-high-drivers ? Thanks for your answers. Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D586 High: Fostex T925 X : active Pre : AVM V1 Amp : AudioValve PPP 30 : Rotel RB 956 CD : NAD 520

Hello Frans, I like the Rotel, i think it's a good preamp for the money. Yes, it has XLR-output and 2 cinch-outputs. Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D221 High: Fostex T825 X : ALK Pre : Rotel RC 995 Amp : AudioValve PPP 30 CD : NAD 520 Cine: Yamaha DSP E 1000 Cent: LaScala Rear: DIY EV

Hello Shock-Late! Al had sent a pair of crossovers to me in germany. Sure, you have to pay the shippingcosts, but also you must pay some taxes: custom tax and "Mehrwertsteuer" (i don't know the word in English or French). I've paid about 65$ for the taxes in Germany and the custom procedure. I hope, this will help. regards, Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D221 High: Fostex T825 X : ALK Pre : Rotel RC 995 Amp : AudioValve PPP 30 CD : NAD 520 Cine: Yamaha DSP E 1000 Cent: LaScala Rear: DIY EV

Hi guys, my television stands on my LaScala. Between them i put a sheet of steel (0,7 mm) and there were no distortion on the TV anymore That helps. Greetings Dieter ------------------ Bass: Klipschorn Mids: Fostex H220 + Fostex D221 High: Fostex T825 X : ALK Pre : Rotel RC 995 Amp : AudioValve PPP 30 CD : NAD 520 Cine: Yamaha DSP E 1000 Cent: LaScala Rear: DIY EV