36Hz-20kHz

Thank you, everyone who replied to my post. I want $400. for these (factory original) Quartets, that is what I paid for them, they sound clean, no noise. They are in mint condition, well cared for... These were built to last a long time and I have cared for them with that in mind. The original owner said he purchased them for $1,100.00. Arrange shipping at your cost, I will deliver them to the shipper of your choice in the LA region, for shipment outside of this area. Buyers in the LA region can arrange local delivery by me. Here are the specs from Klipsch: FREQUENCY RESPONSE:38Hz-20kHz(+-)3dB SENSITIVITY:97.5dB @ 1watt/1meter POWER HANDLING:100 watts maximum continuous (500 watts peak) MAX ACOUSTIC OUTPUT:117.5dB SPL NOMINAL IMPEDANCE:8 ohms TWEETER:K-76-K 1" (2.54cm) Polymer diaphragm compression driver HIGH FREQUENCY HORN:90(o)x40(o) Exponential Horn MIDRANGE:K-61-K 1.5" (3.81cm) Phenolic diaphragm compression driver MID FREQUENCY HORN:90(o)x40(o) Tractrix® Horn WOOFER:K-10-K 10" (25.4cm) Fiber-composite cone active / KD-13 12" (30.48cm) Fiber-composite cone passive CROSSOVER FREQUENCY:HF 7,000 Hz LF 650 Hz ENCLOSURE MATERIAL:Medium density fiberboard construction (MDF) ENCLOSURE TYPE:Bass reflex via passive radiator DIMENSIONS:31.2" (79.25cm) x 15.9" (40.39cm) x 12.25" (31.12cm) WEIGHT: 52 lbs. (23.6kg) FINISHES:Walnut Oil, Oak Oil, Oak Clear, Finished Black BUILT FROM:1989 BUILT UNTIL:1996

Hello all, I have a pair of Klipsch Oiled Oak Quartets, that are completely factory original, consecutive serial numbers and in beautiful condition. Would there be any interested buyers here? These are amazing speakers and sound wonderful. I purchased these from the original owner, a studio technician, in Seattle, WA and have since moved them to Southern California. I currently have them connected to my 235 watt Crown amplifier and pre-amped with my Sony TV. I am selling these because I was fortunate to find a pair of original Chorus speakers,.oiled oak also, but somewhat less than perfect cabinet exteriors and slightly abused, with nicks and scratches. The interiors were perfect and clean and had never been opened. I prefer the chorus speakers with the 18" bass speakers in a two way stereo configuration. I was planning to use the Quartets as rear surrounds, but room constraints and an "irritated better half" prevented this from ever becoming a reality. What would you value these Quartets at considering all the information I have provided? Thank you

An ad reads one mid range horn and one tweeter horn, in one speaker, do not work. I am trying to get a estimate or cost to repair/ replace components, if I do the work, vs paying someone else. The ad sale price is $100 for the pair. Is it still possible to get working parts for the older Klipsch series.

Yes, thank you for pointing this out. I did mean to refer to the RC-3 center channel speaker size... and I'll leave speaker design to those of you who understand function, design and resonance and enclosure properties, frequencies and everything else that makes speakers what they are... and function together properly... .... I was just wondering what one might be able to do to get more midrange presence... and volume, then again that is what graphic equalizers are for ...

Interesting concept .... yes ... very nice... thank you....

Anyone got any opinions on adding a pair of RF3 - 6" copper cone speakers to the already magnificent original Klipsch Choruses? Just wonderin" .... My thinking, in terms of sound presentation, adding more midrange, guitar sound quality, for a front main stereo pair.... How would you / could you adapt the crossover network, or would a complete crossover redesign be required? Modify to a four way crossover ? .... or just move the crossover out of the RF-3 cabinet into the Chorus cabinet, & wire it in, in series? The chorus 45Hz-20kHz(+-)3dB plus the 62Hz-20kHz(+-)3dB of the RF-3 ... The power handling properties of the cross overs come into question here... In addition to the midrange horn, position two 6" cone speakers in each Chorus cabinet.... Layout may be a little tricky.... And ... suppose you replaced the original Chorus tweeter horn with the larger RF-3 tweeter & horn... These Chorus cabinets are big... wouldn't they benefit from a bigger horn? An original 90(o)x40(o) Exponential Horn versus a 6" square 90(o) x 60(o) Tractrix® Horn .... Hmmmm ........ However, I really don't want to modify the cabinet.... because once you do ... goodbye original value... But a RF-3 center channel speaker on top of each Chorus looks kind of awkward, but the improved sound quality is ... Killer ... Please consider all of this hypothetical, if you will, an exercise in " what if ?" ... If you fancy this sort of thing..... Thanks, John

Got it thanks, I understand the A+B channel combination switch selection, but there is only one L & R preamp output connection on the back of the Carver. I am only using the preamp section of the Carver. The Crown amp has variable independent L&R level controls, while the Acurus level is controlled with variable input volume from the preamp. Maybe I just need to find a multi -channel preout receiver, if there is such a thing?

Hi thanks, One example is the preout section of my old Carver stereo receiver, to my Crown amp for my Choruses and the same preout signal to my Acurus amp for my RC3II's. The Choruses don't have quite enough brilliance, i.e., drum cymbals, sound dull and flat. ( The Chorus tweets are working ) I have supplemented the Choruses with a pair of RC 3 II centers, set up as additional left and right front mains. They sit atop the Choruses. This may sound a little extreme, but it works... This is a temporary fix, until I can further determine the cause of 'lack of brilliance' in the sound, weather it be the speakers or even possibly the old stereo receiver. Another example would be using one preamp signal to drive the Choruses with the Crown amp and one preamp signal to drive my Quartets with the Acurus amp. My Carver receiver has the removable preout / main jumpers, to isolate the preamp and amplifier section.

Is it possible to use Y adapters and split my stereo preamp output to provide two L/R inputs for two different power amps? Ex.: Carver preamp out, to Crown power amp and to Acurus power amp. Or, what type of preamp equipment could I use, which would provide multiple outputs? How do you disconnect the power amp section of a 5.1 or 7.1 AV receiver?

Specifications Get a nice power amp to wake em' up .... see that 500 watts peak... ! They like power... oh yes, they do..... FREQUENCY RESPONSE 50Hz-17kHz(+-)5dB POWER HANDLING 105 watts maximum continuous (500 watts peak) SENSITIVITY 96dB @ 1watt/1meter NOMINAL IMPEDANCE 8 ohms TWEETER K-77-M 1" (2.54cm) Phenolic diaphragm compression driver HIGH FREQUENCY HORN 90(o)x40(o) Exponential Horn MIDRANGE K-55-V 2" (5.08cm) Phenolic diaphragm compression driver MID FREQUENCY HORN 80(o)x30(o) Exponential Horn WOOFER K-22 12" (30.48cm) Fiber-composite cone ENCLOSURE MATERIAL Birch Plywood or Veneered Lumbercore ENCLOSURE TYPE Sealed DIMENSIONS 21.4" (54.36cm) x 15.5" (39.37cm) x 13.2" (33.53cm) WEIGHT 55 lbs. (24.97kg) FINISHES Walnut, Rosewood, Teak Oil, Walnut, Oak, Cherry Lacquer, Raw, Black Birch BUILT FROM 1957 BUILT UNTIL 1985

Yes exactly what I was thinking... the ad has been up for several days now .... unusual for a decent deal like this, in this area... I've requested a little more info from the seller; i.e., original condition, working condition, etc.

Hey all, I'm looking for your opinion on a pair of Klipsch Heresy speakers for sale. Please reference the ad from Craigslist in Seattle. http://seattle.craigslist.org/sno/ele/1697640188.html Thanks John

Thank you...

Hi all, Does anyone remember what the KG 3 retail price range was from 1990 - 1992? Thanks

a lot of history here .... thank you

thank you

Hi Everybody... Does anybody know where to find out about Klipsch serial numbers? Does Klipsch have an interactive page to track down your Klipsch speaker models & serial numbers? How old are these speakers, what year were they manufactured, etc. Also, It would be helpful to note any product upgrades available, where pertinent... Thank you

A long lost passion - being a musician... your link is definitely note worthy (no pun intended) and worth a look ... Thank you

This gets more interesting.... thank you... anybody else?

You ask & Thou shalt receive, the folks here at Klipsch Forums are great... thank you, With everybody's responses, I've determined that everything is as it should be.... I am the proud 2nd owner of a fine pair of oiled oak Quartets w/ sequential serial numbers & the original brochure. They sound natural, clean, I don't even have to add treble and bass control, they sound nice zeroed out. John

I am trying to find out if I have a non- Klipsch replacement speaker in a pair of Quartets I recently purchased. The speaker in question is the front facing woofer. This speaker appears to have a paper cone with a oily ribbed looking surround. I was under the impression that Klipsch speakers were made with flexible rubber surrounds... ? Any advice, description, close-up photos would be greatly helpful and appreciated. That is, before we have to remove the woofers to look for tags & part numbers... Thank you.

Desperate times require desperate measures.... This is a much lower level of mentality we are dealing with, here. Like it or not, we are all dealing with it because who ends up paying for it? Hello..... They don't have many problems like this in some other countries, because the criminal just gets killed by the police right on the spot... but that type of response is way too inappropriate for American Society...

That is exactly what I was looking for, thank you.

Little Feat "Waiting For Columbus", (live album) - recorded to CD with full lossless audio compression, (FLAC). Check it out & look it up on the internet if you haven't tried it yet.... OMG!

Here are some examples from Klipsch .... So... what does this mean as regards to what you hear... KG 4 Specifications FREQUENCY RESPONSE 38Hz-20kHz±3dB KG 4.5 Specifications FREQUENCY RESPONSE 36Hz-20kHz±3dB SB-3 Specifications (Bookshelf Speakers) FREQUENCY RESPONSE 52Hz-20kHz±3dB Quartet Specifications FREQUENCY RESPONSE 38Hz-20kHz±3dB