Mark H Posted January 15, 2009 Share Posted January 15, 2009 I have a pair of RF-63's connected to the Denon 2809. I'll be adding the RC-64, RSW-10d, and pair of CDT-5800-C's over the next couple of months, but for now this is a 2 channel set-up. I have a few simple questions. Should the Denon be set to Large or Small speakers? Will this change when I add the sub? What is the right speaker cable to use for this set-up? I don't want to go overboard, but want to make sure the cables are as good as they should be. How does the 2809 handle RF-83's? I'm debating upgrading the 63's to 83 and trying to learn if I would have to upgrade the receiver as well. Thanks a lot, love the forum, Mark Quote Link to comment Share on other sites More sharing options...
willland Posted January 15, 2009 Share Posted January 15, 2009 Welcome. Being that you do not have the center,sub and surrounds yet, I would set the RF-63's to large. You would want the full band to be reproduced. I have the RSW-10d with my Rf-63s and have the fronts set to small and at 60hz and the LFE set at 80hz. I have tinkered with the settings for some time and feel now I have them set best to my ears. Let me tell you the little RSW-10d works great with the 63's. I love the combination. I can't speak from personal experience with a pair of 83's, but I think the 63's with the right setup(sub,center,surrounds,amp,pre-amp), would run a close second to the 83's. If it were me, I would use the money saved to use the 2809 as a pre-amp and purchase a 3-channel or 5-channel amp to power your speakers. Here's a link to the best amp buy on the net: http://emotiva.com/xpa3.shtm Bill Quote Link to comment Share on other sites More sharing options...
Mark H Posted January 15, 2009 Author Share Posted January 15, 2009 Cool. Thanks a lot for the advice. Can't wait to get the rest of the speakers. Especially that sub. I'm really anxious to see how that affects the 63's when listening to music. I know there's been a lot said about speaker cable on the forum, but do you think standard Monster Cable suffices for a set-up like this? Thanks again, I'm going to check out that amp. Quote Link to comment Share on other sites More sharing options...
willland Posted January 15, 2009 Share Posted January 15, 2009 I know there's been a lot said about speaker cable on the forum, but do you think standard Monster Cable suffices for a set-up like this? I don't think you have to buy name brand cable to get good performance. My suggestion is to buy at minimum 14 gauge good insulated wire. Here is a link that might clear some things up about speaker wire: http://www.roger-russell.com/wire.htm Bill Quote Link to comment Share on other sites More sharing options...
willland Posted January 15, 2009 Share Posted January 15, 2009 Can't wait to get the rest of the speakers. Especially that sub. I was fortunate to buy my cherry RSW-10d at Vanns for $499.79. They no longer carry the cherry RSW-10d anymore. Here is an even better deal than I got: http://www.vanns.com/shop/servlet/item/features/549591117/klipsch-rt10d-cherry Bill Quote Link to comment Share on other sites More sharing options...
tommyboy Posted January 15, 2009 Share Posted January 15, 2009 go to partsexpress.com for all your cables. I know you see all monster wiring in my sig, but I bought all that before I knew any better........... momoprice.com is another good place too. Quote Link to comment Share on other sites More sharing options...
tommyboy Posted January 15, 2009 Share Posted January 15, 2009 Nevermind, my sig USED to say all monster wiring......... Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 15, 2009 Moderators Share Posted January 15, 2009 momoprice.com is another good place too. Tommy is correct, he just can't spell (but don't hold it against him) [] www.monoprice.com Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 15, 2009 Moderators Share Posted January 15, 2009 I was fortunate to buy my cherry RSW-10d at Vanns for $499.79. They no longer carry the cherry RSW-10d anymore. Here is an even better deal than I got: Wow, Vanns is offering insane cuts on the cherry finish. That's crazy. Why not sell what inventory you have at full price? Quote Link to comment Share on other sites More sharing options...
willland Posted January 15, 2009 Share Posted January 15, 2009 Why not sell what inventory you have at full price? Maybe Klipsch is offering some sellers rebates to help liquidate the cherry ref series to make room to bring in more of the WF Icon series. Just a guess. Bill Quote Link to comment Share on other sites More sharing options...
Mark H Posted January 15, 2009 Author Share Posted January 15, 2009 Thanks for the info on the speaker wire. Really appreciate it. Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 15, 2009 Moderators Share Posted January 15, 2009 Maybe Klipsch is offering some sellers rebates to help liquidate the cherry ref series to make room to bring in more of the WF Icon series. Just a guess. Good guess. That may be why several online vendors are selling it for the same price, $599 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.