enhanced250 Posted December 31, 2011 Share Posted December 31, 2011 So my sub 12 has the infamous fuse issue......I found a BASH amplifier 300S that will seem to work just fine. I dont have a making the opening larger my only question is when I took the old amplifier out there was a (+) (-) cable and a white cable. What is the white cable and will it connect to the new BASH amplifier (non-OEM)? Quote Link to comment Share on other sites More sharing options...
TurboGen Posted January 2, 2012 Share Posted January 2, 2012 The white wire is for the LED on the front of the sub. (I think) just follow it inside the box should indicate that it goes to the LED Quote Link to comment Share on other sites More sharing options...
enhanced250 Posted January 7, 2012 Author Share Posted January 7, 2012 You are correct I followed the wire.......1 more question is the sub12 4 or 8ohm im looking to replace the amp w a bash 300s amp which is rated at 300rms at 4ohms. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted January 7, 2012 Share Posted January 7, 2012 Unplug the driver and put a DVOM on the terminals to see what the load is. Quote Link to comment Share on other sites More sharing options...
enhanced250 Posted January 7, 2012 Author Share Posted January 7, 2012 It came up 5ohm so im guessing this is a 6ohm configuration? The bash 300s is 300rms at 4 ohms so prob like 200rms at 6? Maybe I should go for the 500s? Quote Link to comment Share on other sites More sharing options...
ounvme Posted January 7, 2012 Share Posted January 7, 2012 If you still have the old amp I could use it for parts if your willing. Quote Link to comment Share on other sites More sharing options...
enhanced250 Posted January 8, 2012 Author Share Posted January 8, 2012 Id be willing for a couple bucks to help me fund a new amp...contact me....brett.Wisniewski@gmail.com if interested Quote Link to comment Share on other sites More sharing options...
enhanced250 Posted January 17, 2012 Author Share Posted January 17, 2012 So ill be replacing the amp with a BASH 500w tomorrow. Ill probably also throw in a bag or two of polyfill and see how it sounds. Ill keep posted. I was going to do the BASH 300 but after measure the speakers resistance I opted for the larger 500w since it will be pushed at 6ohms....hoping for a slight improvement. Quote Link to comment Share on other sites More sharing options...
robbanton Posted January 27, 2012 Share Posted January 27, 2012 Any luck or opinions on the replacement? Also do you know if the 300s would be a direct fit into the sub? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.