Evolvo Posted June 4, 2012 Share Posted June 4, 2012 I opened up the crossover on the bass bin and noticed the hf speaker connectors were severed, I'm guessing to bi amp them. I just want to confirm how to solder them back together. Do I just simply run the negative to negative and positive to positive from the LF input to the HF input. There are other crossover components in there but I'm guessing all of that is soley for tha woofer. Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted June 5, 2012 Moderators Share Posted June 5, 2012 Yes - to - and + to +, there should be a terminal strip with woofer, squawker, and tweeter marked on it, + or - for each driver. If there like most crossovers. Quote Link to comment Share on other sites More sharing options...
garymd Posted June 5, 2012 Share Posted June 5, 2012 Post photos and we'll be more than happy to help you put it back together correctly. In fact, I'm sure someone here with a similar model will show you a picture of their properly connected Khorn if necessary. Quote Link to comment Share on other sites More sharing options...
Guest " " Posted June 5, 2012 Share Posted June 5, 2012 here is the back of the ak-3 Quote Link to comment Share on other sites More sharing options...
Evolvo Posted June 5, 2012 Author Share Posted June 5, 2012 Thanks this is exactly what I need but I can't tell if the pic is upside down or not. I have included pics of mine. Also I can't see clearly were the wires are connected to the fuse. Could you possible take a closer pic. I took a pic with mine unhooked how it was when I purchased them and how it looked after I hooked them up the way I assumed they should be. The terminals on the bottom of mine are the woofers connected and the unconnected top two are the HF section. Quote Link to comment Share on other sites More sharing options...
Evolvo Posted June 5, 2012 Author Share Posted June 5, 2012 Pic 2 Quote Link to comment Share on other sites More sharing options...
Evolvo Posted June 5, 2012 Author Share Posted June 5, 2012 I didn't take off my whole back but i will cause it appears that it is hooked up different than yours because I notice 2 wires on mine going to the negative terminal. Quote Link to comment Share on other sites More sharing options...
Guest " " Posted June 5, 2012 Share Posted June 5, 2012 I didn't take off my whole back but i will cause it appears that it is hooked up different than yours because I notice 2 wires on mine going to the negative terminal. it looks like there has been some customization going on.....you should pull the whole board to see if you have an ak-3 or ak-2, then from there decide what the restoration path will be. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.