Aj72 Posted August 9, 2013 Share Posted August 9, 2013 Ive just bought a pair of used KLF 30. There are two sets of red and black inputs for the speaker wire. My old KG 5.5's only had one black and red input (because they are two way?). Is the reason for the two sets on the KLF30 for biamping? Whats the best way for me to connect to both these sets of terminals using just one speaker cable? Do I only need to connect to the bottom set and leave the top one without? Would this mean just the lower frequencies will be heard? Jumpers between two sets? A bit confused as first set of speakers Ive had with two sets of (red and black) cable connections. Quote Link to comment Share on other sites More sharing options...
Mongo171 Posted August 9, 2013 Share Posted August 9, 2013 If there are two pairs of binding posts, there should be a jumper installed. Just connect to one set. Quote Link to comment Share on other sites More sharing options...
snailtrax Posted August 9, 2013 Share Posted August 9, 2013 If there are no jumpers then you will have to buy or build some. Bottom is for lows and top is for highs. Or you could bi-amp. Quote Link to comment Share on other sites More sharing options...
derrickdj1 Posted August 9, 2013 Share Posted August 9, 2013 You can also run speaker wires from the top and botom post=biwire. Or, you easily make a jumper from some extra speaker wire. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.