Khornukopia Posted June 3, 2014 Author Share Posted June 3, 2014 The veneer is very thin so the edges blend in, but you may want to glue on the sides first, then the face trim and then the top veneer piece in that order, so you cover the thin edges from the main viewing angles. On the face trim, the veneer corners are 45 degree miter cut with a razor and those ends are butted together. A forum search of "re-veneering" will connect you with many good forum member's instructions. After studying those, I suggest practice gluing veneer, trimming and sanding on some blocks of wood the size of a DVD case. Later on these blocks can be used for trying different stains, lacquers or oil finishes. Quote Link to comment Share on other sites More sharing options...
kaiser SET say Posted June 3, 2014 Share Posted June 3, 2014 Gorgeous grain patter Khorn-U Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 3, 2014 Share Posted June 3, 2014 I think Marshall used to use a router bit that spun and spiraled slightly downward as it cut. The downward spiraling cut was to prevent lifting or chipping of the veneer as it trimmed the edge. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.