jwc Posted April 27, 2016 Share Posted April 27, 2016 (edited) A beast. You should google the specs. Look how wide it is and how much it weighs. Brought up on the variac. All lights appear to work accept for one section pointed out (tuning meter -lol-). The bulb looks easy to replace from the inside and the specs for it is labeled there. Tuner works. But the slider isn't moving. The little plastic piece that was affixed to the tuner string is broken off. The flywheel spins. You would need to glue the string to the moving slider once you have the radio station dialed in to the correct spot. I've done this a few times in the past. NOTE: the slider is now attached and working fine. The FM tunes just fine. I did not check the phono. This isn't a rusty unit. No obvious scratchy knobs. Channels even and this thing is powerful. One of the biggest transformers I've seen in awhile. Has a flaw in the wood on the left back and an unfortunate sctratch on the top front face plate. I had my iPod hooked to it and playing with no audible distortion. Warm...powerful. This beast pushing some KP-250's....you won't go past Number 1 on the volume dial. I cleaned the knobs and switches. Sold as is. $180 $150 shipped. Will cost me $60 I bet to ship. Check to CigarBum. PM me for details. I may use packing peanuts. https://www.youtube.com/watch?v=2geHgEn6MVs Edited June 1, 2016 by jwc Quote Link to comment Share on other sites More sharing options...
jwc Posted April 27, 2016 Author Share Posted April 27, 2016 more pics Quote Link to comment Share on other sites More sharing options...
jwc Posted April 27, 2016 Author Share Posted April 27, 2016 Look at image 56. That black plastic square just needs to be superglued to the string once the slider is in the right tuned position. Quote Link to comment Share on other sites More sharing options...
jwc Posted April 27, 2016 Author Share Posted April 27, 2016 Image 24. look upclose. the two black wires going in and out of the white plastic housing has the burned out bulb. Pop it out and place new bulb. The spec are written on the white plastic. Piece of cake....right? Yea right. Or just leave the damn thing alone Quote Link to comment Share on other sites More sharing options...
jwc Posted April 27, 2016 Author Share Posted April 27, 2016 Please don't make me keep this power.... Quote Link to comment Share on other sites More sharing options...
jwc Posted May 6, 2016 Author Share Posted May 6, 2016 bump Quote Link to comment Share on other sites More sharing options...
jwc Posted May 8, 2016 Author Share Posted May 8, 2016 price reduced $150 shipped Quote Link to comment Share on other sites More sharing options...
jeff spicoli Posted May 9, 2016 Share Posted May 9, 2016 jwc you have a pm Quote Link to comment Share on other sites More sharing options...
jwc Posted May 9, 2016 Author Share Posted May 9, 2016 PM replied Quote Link to comment Share on other sites More sharing options...
jwc Posted June 1, 2016 Author Share Posted June 1, 2016 update see first post Quote Link to comment Share on other sites More sharing options...
jwc Posted June 2, 2016 Author Share Posted June 2, 2016 for further clarification...... Cleaned switches and knobs and back panel with Caig's deoxit. Repair is glueing the tuner slider to the flywheel string. It had become unattached. Listened to a couple of CD's and Tuner while fiddling with the knobs and switched. No apparent issues. Other notable points in first post. I'm not a certified tech. sold as is. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.