marems Posted June 28, 2016 Share Posted June 28, 2016 Hello does anyone have a CF-2 crossover schematic?? Quote Link to comment Share on other sites More sharing options...
Full Range Posted July 2, 2016 Share Posted July 2, 2016 (edited) You may find it here --- https://community.klipsch.com/index.php?/topic/113804-klipsch-crossovers/ Alternatively- Is this of any help http://analogmetric.com/download/CF2%20Two%20Band%20Phase-linear%20Crossover%20Filter%20Schematic.pdf And the user manual http://analogmetric.com/download/CF2%20Two-Band%20Phase-Linear%20Crossover%20Filter%20User%20Manual.pdf Edited July 2, 2016 by Full Range Quote Link to comment Share on other sites More sharing options...
marems Posted July 6, 2016 Author Share Posted July 6, 2016 Searched the crossover thread already and nothing :/..... Rhe second link is a passive crossover, bot the correct one im looking for, but thank you for your responses! Quote Link to comment Share on other sites More sharing options...
Rivervalleymgb Posted July 6, 2016 Share Posted July 6, 2016 My CF-2 are Series I, and I have yet to find a schematic. I have though about dropping a pair of the crossovers at Bob,s and let him do the work. Quote Link to comment Share on other sites More sharing options...
avguytx Posted July 6, 2016 Share Posted July 6, 2016 If it's a cap change only, just take the crossovers out and replace with the same value caps. They aren't that bad to replace with minimal soldering skills. I've used Solen caps for the last 25+ years in most everything I've built/rebuilt for both car and home audio with great results. I've tried some of the more expensive caps but didn't hear enough difference to substantiate. But, everyone seems to be different on caps. And that's ok. Quote Link to comment Share on other sites More sharing options...
marems Posted July 6, 2016 Author Share Posted July 6, 2016 I an aquiring a pair of CF-2's at the end of the month, I have recapped my Fortes and CF-4's so i am familiar with the process now, just wanted to purchase the caps and resistors before i get ghe CF-2's Quote Link to comment Share on other sites More sharing options...
avguytx Posted July 6, 2016 Share Posted July 6, 2016 (edited) I would be weary of trusting what's on a schematic versus what's in the actual cabinet. To me, that's putting the cart in front of the horse. There could have been changes, alterations, etc. It's happened plenty of times with every brand. I've not seen a schematic for a CF-2 that I recall. You might email Bob Crites and see if he has anything written down on them. Edited July 6, 2016 by avguytx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.