angelluisg Posted October 28, 2022 Share Posted October 28, 2022 how to get the juice i have a my system is 7.2.4 dolby atmos but I like to listen to music on 2 channels RF7III (LR) Marantz Av7705 + Monolith 11X (amp)connection XRL streaming Tidal master MQA Bluesound node full range? or 60hz, or 40 Hz + Subwoofer klipsch R-115SW SVS-PB-1000 Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted October 28, 2022 Share Posted October 28, 2022 I'd experiment between full range and crossing over to the sub at 60 Hz. Use an SPL meter to see which you like louder or better. Fwiw, I prefer using my subs on 2 channel because they can hit those lower notes cleaner but I don't know how the R-115SW performs in your room. Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted October 29, 2022 Share Posted October 29, 2022 For music I would try setting your RF-7s to large and turning on double bass, main + LFE or whatever your receiver calls it to have bass from your sub and RF-7s. 1 Quote Link to comment Share on other sites More sharing options...
angelluisg Posted October 29, 2022 Author Share Posted October 29, 2022 17 hours ago, Zen Traveler said: I'd experiment between full range and crossing over to the sub at 60 Hz. Use an SPL meter to see which you like louder or better. Fwiw, I prefer using my subs on 2 channel because they can hit those lower notes cleaner but I don't know how the R-115SW performs in your room. subs main + LFE crossover 120 or less at subs knobs? or Av marantz 7705? Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted October 29, 2022 Share Posted October 29, 2022 Put the crossover on the sub itself as high as it will go. Let your AVR control the crossover, LFE @ 120 Hz. 1 Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted October 29, 2022 Share Posted October 29, 2022 (edited) 1 hour ago, angelluisg said: subs main + LFE crossover 120 or less at subs knobs? or Av marantz 7705? I'd try setting the crossover on the AVR at 60 Hz and leave the sub's knobs (Low Pass Filter) at 120. Edited October 29, 2022 by Zen Traveler 1 Quote Link to comment Share on other sites More sharing options...
angelluisg Posted October 29, 2022 Author Share Posted October 29, 2022 6 minutes ago, Zen Traveler said: I'd try setting the crossover on the AVR at 60 Hz and leave the sub's knobs (Hi Pass Filter) at 120. is confuse, in subs knobs 60hz , but in marantz main+lfe 120? or 60hz and RF7 III better 60hz , 40hz or large ? Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted October 29, 2022 Share Posted October 29, 2022 My bad. (Note: I meant LPF on your sub and not HPF in the previous post. 125 Hz or full shouldn't make much difference if you set the crossover in the AVR) I'd leave the LPF on the sub where it is and crossover your RF7s to the sub @ 60 Hz on the AVR. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.