Madman1 Posted January 19, 2023 Share Posted January 19, 2023 This is a vintage thx subwoofer, 15” beefy woofer, 15” passive, amp works but I don’t completely understand how it all works since it doesn’t have a crossover built in. Cabinet is rough. I would sell the whole unit for but no shipping…it’s BiG! would sell the woofer and passive for plus shipping, not sure about the amp, message me if interested and for any pics. Quote Link to comment Share on other sites More sharing options...
jjptkd Posted January 20, 2023 Share Posted January 20, 2023 2 hours ago, Madman1 said: This is a vintage thx subwoofer, 15” beefy woofer, 15” passive, amp works but I don’t completely understand how it all works since it doesn’t have a crossover built in. Spec's from another thread: The KT-SW is a THX certified sub, specs are as follows: FREQUENCY RESPONSE: 35Hz-250Hz±3dB ENCLOSURE TYPE: Bass reflex via passive radiator AMPLIFIER POWER: 200 watts maximum continuous (252 watts peak) LOW PASS CROSSOVER: Fixed 250Hz (THX processor will x-over @ 80Hz) INPUTS: 2) Line level RCA phono jacks and 2) High level speaker terminals OUTPUTS: 2) Line level RCA phono jacks (fixed 80Hz HP - 6dB/octave slope) and 2) High level speaker terminals (fixed 120Hz HP - 6dB/octave slope) PHASE: Switchable 0 or 180 degrees DRIVE COMPONENTS: Subwoofer system using one 15" (38.1cm) front-firing, fiber-composite cone woofer and one 15" (38.1cm) rear-firing, fiber-composite cone passive radiator SUBWOOFER: K-35-KV 15" (38.1cm) Fiber-composite cone active / KD-18-K 15" (38.1cm) Fiber-composite cone passive DIMENSIONS (H x W x D): 26" (66cm) x 18.5" (47cm) x 19.56" (49.7cm) WEIGHT: 82 lbs. (37.2kg) ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF) FINISHES: Whitewash, Light Oak, Medium. Oak, Cherry, Walnut, Black Satin YEARS BUILT: 1994 - 1997 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.