randydb Posted February 13, 2011 Share Posted February 13, 2011 I fixed my loose front panel on one of my KLF20s using Trey's instructions here.I also noticed that the thin piece of veneer that is at the bottom front was loose so I replaced it while I was at it. I had some glue backed oak veneer tape that I cut and ironed on where the other piece had lifted. Used some minwax ebony stain mixed with semigloss poly to colo. Here are my pics. Quote Link to comment Share on other sites More sharing options...
randydb Posted February 13, 2011 Share Posted February 13, 2011 Pic of iron on oak veneer. Quote Link to comment Share on other sites More sharing options...
randydb Posted February 13, 2011 Share Posted February 13, 2011 All glued up and final stain complete. Speakers back in. It has a paint mark on the side of the cabinet I am going to buff off next. If it doesn't go I can use stain on that part too. I had to wait for my other part to dry to make sure that it matched first. Thanks for this thread. Randy Quote Link to comment Share on other sites More sharing options...
fini Posted February 14, 2011 Share Posted February 14, 2011 Excellent repair, Randy! Good ironing technique. Do you do shirts, too? Quote Link to comment Share on other sites More sharing options...
leftwinger57 Posted February 25, 2011 Share Posted February 25, 2011 possibly liquid nails and a stap style clamp. If the clamp of any kind isused of course protect the edges Quote Link to comment Share on other sites More sharing options...
randydb Posted February 25, 2011 Share Posted February 25, 2011 I just used liquid nail and couple bar clamps. http://www.toolking.com/media/catalog/product/c/l/clamp_1.jpg Quote Link to comment Share on other sites More sharing options...
superedge88 Posted February 25, 2011 Share Posted February 25, 2011 Pl premium is a much better suited adhesive for this type of project than liquid nails. I didn't even have to remove the old adhesive, works like a charm. Just my two cents. Quote Link to comment Share on other sites More sharing options...
randydb Posted February 25, 2011 Share Posted February 25, 2011 Pl premium is a much better suited adhesive for this type of project than liquid nails. I didn't even have to remove the old adhesive, works like a charm. Just my two cents. That is actually the product I used...I have tended to call construction adhesives that come in a caulking tube "Liquid Nail." I knew there were differences between adhesive for styrofoam and wood, but I figured that pl premium was just another company's version of liquid nail. Randy Quote Link to comment Share on other sites More sharing options...
randydb Posted February 25, 2011 Share Posted February 25, 2011 Pl premium is a much better suited adhesive for this type of project than liquid nails. I didn't even have to remove the old adhesive, works like a charm. Just my two cents. That is actually the product I used...I have tended to call construction adhesives that come in a caulking tube "Liquid Nail." I knew there were differences between adhesive for styrofoam and wood, but I figured that pl premium was just another company's version of liquid nail. Randy Quote Link to comment Share on other sites More sharing options...
rick_m Posted March 2, 2011 Share Posted March 2, 2011 PL Premium = solid strong bond! used that stuff myself and wallah no more vibration and nice tight bass! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.