BEERbrooklyn Posted July 9, 2008 Share Posted July 9, 2008 I Recently brought 2 8" klipsch woofers from ebay .They are the same1"s in the rc-7 .I built a box same dimmensions as the center rc7.Ibeen making boxes for over 15 years.{x car audio installer}.Can any 1tell me what diameter and lenght the rear ports are?Also is the rc 7use filler material .I wanted to buy the 60x90 but its over 200$.I useda ev horn,i fell they r almost as good .It sounds great alreadty,justneeed to tune it with the proper size ports.Some1 please help. Quote Link to comment Share on other sites More sharing options...
falcon20x Posted July 12, 2008 Share Posted July 12, 2008 I think you're right Dean. When you did mine the main thing I noticed was increased clarity. I noticed the same thing. Quote Link to comment Share on other sites More sharing options...
BEERbrooklyn Posted July 20, 2008 Share Posted July 20, 2008 WHERE DO YOU GET THE UPGRADED CROSS-OVERS?aND HOW MUCH DO THEY COST?sorry for the caps ,i hate typing. Quote Link to comment Share on other sites More sharing options...
Deang Posted July 20, 2008 Share Posted July 20, 2008 People send me the networks out of the their RF-7/RC-7 and I modify them, I don't build from scratch. Networks are specific to the drivers being employed, and since you aren't using the stock driver/horn the network won't don't you much good anyways. Quote Link to comment Share on other sites More sharing options...
BEERbrooklyn Posted July 21, 2008 Share Posted July 21, 2008 i m using the 10 1/2 inch klipscvh horh.i think its 10x8.doyou have a cros over you can sell me? the box and ports are same dimensions.if you need the #'s off the horn i will furnish.btw i am building a rt7 sub woofer . i need the radiators any idea where i can get them? thank youfor taking the time to respond. Quote Link to comment Share on other sites More sharing options...
BEERbrooklyn Posted July 21, 2008 Share Posted July 21, 2008 1 more thing does any1 knoe the ohms of the rt7 sub-woofer? Quote Link to comment Share on other sites More sharing options...
BEERbrooklyn Posted July 21, 2008 Share Posted July 21, 2008 i meant RT-10 Quote Link to comment Share on other sites More sharing options...
MitsuMan Posted July 31, 2008 Share Posted July 31, 2008 You have a PM [] Quote Link to comment Share on other sites More sharing options...
KLIPSCH FOR LIFE Posted August 19, 2008 Share Posted August 19, 2008 Hello Dean, Could you tell me what it would cost to do that voodoo that you do to a pair of RF-7's and an RC-7 and what the turn around time would be once you receive the crossovers? Thank You, Joe Quote Link to comment Share on other sites More sharing options...
BEERbrooklyn Posted August 19, 2008 Share Posted August 19, 2008 chriszambrotta@yahoo.com Quote Link to comment Share on other sites More sharing options...
Deang Posted August 19, 2008 Share Posted August 19, 2008 Sorry guys, I'm not taking on any new work right now. Quote Link to comment Share on other sites More sharing options...
MitsuMan Posted August 20, 2008 Share Posted August 20, 2008 I kinda figured that, that's why I didn't call your cell. [] Quote Link to comment Share on other sites More sharing options...
johnhart Posted December 24, 2008 Share Posted December 24, 2008 Season Greetings Where can I get those Dean G crossovers for my RF7s? Regards John Quote Link to comment Share on other sites More sharing options...
Deang Posted December 24, 2008 Share Posted December 24, 2008 dgwescott@sbcglobal.net Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.