427rs

I won an auction of E bay for a nice old 62 LT 110 With the brown face and knobs. I was wondering if anyone has built a case for their Scott eguipment and may have the measurments handy. I have a friend who could build me a nice piece to match my Peach Preamp case. Thanks, Brian

Lets all keep our eyes out for Jon. He came to my home, was a perfect gentleman and his musical taste and fine ear far exceeds his age. I hope to have him back when I get my Altec A 7s restored for another listen. Next time he can spend the night and do the Fingerlakes Wine Trail with us. Brian

I live alittle bit out in the country. Not to far out though. My e-mail address is Cunning42@aol.com. Feel free to contact me and I will get detailed directions for you. Just let me know which direction you are coming from. I would think through Binghamton and down 17/86W. Bring anything you would like to hear. Brian

I think he may have brought them by your shop. I believe they are the VTA s. I have them hooked in triode and dont know if I like them as well that way. Brian

I am probably on the outside of a 2 hr trip. Perhaps about 3 hrs away. I live in Horseheads NY about 15 minutes from Watkins Glen International Racetrack. I work for the State and travel periodically but I know I will be in town Easter Weekend and the weekend following. I have my amps set up in triode which gives excellent Mids but lacks bottom unless you dont mind some volume, then the bottom end returns. Check out mapquest to see if I am close enough for you to visit. Brian

Check out www.edn.com and search for keyword Boosted Triode. The article dated 6/12/2003. I have my Mark 3s hooked up in triode and am currently going to add larger capacitors on either side of the choke. I was thinking of doing this mod as well to boost the bottom end. Brian

The Getter in the top of the tube is the venerable "D" getter. The best. Rare. I knew once you got a little time on the tube you would love it. The pinch waste tubes from holland are very rare. I felt the same way when I saw how nice the tube was. Someone had taken very good care of them. I run the Peach in Hi Z mode and love it. Wait till you get about 50 hrs on it. It gets really smooth. Brian

I currently run tongsol 6550 blackplates. When you get a good listen please come back and give us a listening report. Brian

The best amperex are from the Holland Plant by far. My tube balances out perfectly left and right at about 10 oclock. You will be very pleased when you get this tube. I hated to put the dampers on the tube because the lettering is absolutly perfect! The pinch waste design probably does not need the dampers but I run them anyway. I have my bar/sound room in an addition above a two car garage and this time of year I have a propane heater hanging from the ceiling down there that kicks on and off occasionally. Since switching to this tube in V1 and using the dampers I have zero harmonics. You wont be sorry! Brian

I have The Monster cable HTS 2000. I have been very happy with it now for about 2yrs or so. I found it on sale on line for about 135. Brian

I bought mine at Tube Depot. Beautiful origional box, perfect lettering. I was told it is NOS and I have no reason to believe it is not. With shipping it was 253.90. I had it in 4 days. I big investment but I am very pleased with the sound quality. Brian

I bought my dampers from dampers@levytubes.com, Miami FL. 33155. High Density SILICONE Vacuum Tube Vibration Dampers. Aerospace Silicone-Rated at 400 Degrees F. I run them on all my tubes everywhere. I even bought the little vibration damping dots for under the Mark 3s. I have bought a closely matched set of Holland Amperex that I can try in V2 and V3. I have a long weekend coming up and will do some more swapping around to let you know. I really love this pinch waste tube in V1 Mark, really Lets the Peach sing. Brian

I have the Telefunken 12ax7 smooth plates. A nicely matched pair. They seem to complement the highs as the Pinch Waste tube in the Peach is a smoother more musical sounding tube than the siemens in V1. I have had a nice set of RCA 5751 Command Series in the Jolida which are very nice but dont sound as good with the Pinch Waste tube in the Peach.

In my peach I purchased an early Holland Amperex Pinch Waste for $250. from TubeDepot. I run it in V1. I have Siemens in V2 and V3. I run the heavy mass tube dampers on all the tubes. The amperex is far superior in sound than the siemens. The siemens sounded nice but were very harmonic. The pinch waste is in a class all by itself. 427rs

Merry Xmas to Paul and all that visit here. How come I cant vote more than once? Brian