Pete H

@RandyH000 Those are a new (never hooked up) pair of Eminence Kappalite's

Just so we're not purging Thursday morning prior to the drive. LMAO

This is a healthy purge. I'm fine, just have to decide on how the funds will be allocated in the near future.

You're just referring to the small access panel that gets to the drivers right? I can certainly shoot a pic of that, and I'm sure it's floating around on the build thread I did.

More pics until I run out of space again.

I'll send you a PM

Come on, Michigan isn't that far from Ohio. LOL Need terms, have something to barter with? I'm open to listening, but would never want to see anyone go after something that's not in the audio budget. I have a ton of stuff, but don't need to sell it for any other reason than I need the room, or a 5,000 sq.' house, and I want to buy some other pieces of gear and get down to 4 systems max.

I used them in a split cornscala project and if memory serves me, they horns themselves were designed to be able to cross down pretty low, around 400hz, depending on driver. I didn't cross them that low and had Dean do a custom set of networks designed around the Crites cast 15's, the fastracs with the Atlas drivers and the Beyma tweeters and I think we were crossing around 500hz. I believe they were used in many other applications, Khorns, LaScala's and definitely other Cornscala's. I will post more pics of things tomorrow, I've used up my space for today.

Yes they are, but I have some bigger thumpers coming to go with the monster thumper sub that I put together. You know the deal Richard, we just can't stay content for ever. LOL

.....

Cornwall 2's Purchased and they were walnut veneer I believe, and the veneer had some issues. Did a quick bondo over those spots and a quick prime and black, but it was never intended to be the final finish. Been moved, stacked, multiple times and you will need to decide what final look you want, or some minor prep and clean up and a finish coat of paint. I installed internal braces from the motorboard to the rear panel (see pics) I recently replaced the diaphragms with Crites titanium's (huge improvement over the stock ones) and everything else is stock and in fine working order. Crossovers are original and the grills need recovered. I took one off completely because it was so bad. (see pics) and I have the other original badge from that grill (see pic) I've moved on from these and built Cornscala splits and moved on from them and they need to go to someone that will actually listen to them. I have too many projects going on to consider doing the detail work to these and then selling them for more. Please ask anything as I want you to have accurate information if considering. BTW, pulled the woofers out and they will be reinstalled but wanted to show the internal brace.

This has been long overdue and I just don't have the room for all this gear and need to finally sell of some items. I will be traveling from N.E. Ohio (close to Canton Ohio) to Beaumont TX and Hope AR next week if there's an interest in anything that can be transported along my route. Klipsch KI396 SMA2 $2,300 B stock, 1 blemish on the side panel see pictures. (Not shipping so local pick up or meet me on the trip or at SWAG next week) Cornwall 2's Need grills recovered and exterior finish $700 Technics SL1200 MK2 with Shure M97Xe cartridge $650 Purchased new, both items, thinking I was getting back into vinyl, installed the cartridge and dialed it in, spun 3 pieces of vinyl and it went on the shelf and was never put into my system as I'm not getting back into vinyl. While it's not NIB, it's as close as you're going to get. Sale Pending Behringer Ultra Drive Pro 2496 $225 Hooked up 2xs and I didn't like the GUI on it so back in the box it went. Beyma CP25 baby cheeks tweeters (2) $140 (never used) SPUD needs some duratex touch up on the outside $300 Fine for HT and will do Ok for music if crossed at the proper point, but I'm 98% music and have many other subs to handle that duty. Behringer inuke 1000 dsp $225 Hooked up for a very short period of time and I went to all QSC and Carver Amps. I will get pics and better descriptions up as well as some additional items later today and tomorrow, but had time to start the post.

And some other Schitt too right?

Nice list! I'm bringing the mini's in a 3way passive configuration. 396's (although I'm going to be listing these in the garage sale section sometime today) Devastator Sub EVTS940D Amps MiniDSP QSC amps Power cords/power strips/misc cables/laptop/External drive from Michael/CD's

I think Uship.

checked them and the K48K's and they all meter out to 4ohm. 4.2-4.4 on the meter. so, now I know that.

Yes, will do. I'm going to check them both and probably run it through DATS to get some numbers on them.

Here's a picture of a set of K48K's next to them. The K48K's are on the right.

Getting ready to sell some drivers and can't identify these particular Klipsch 15" cast woofers and the labels came off a long time ago. I've done some searches, but can't seem to find anything that clearly shows what it is. Any assistance would be appreciated.

I'll have it playing when I pull in to pick you up.

Mark, I called the Super 8 myself after booking through Expedia and being told the same thing. It was a little back and forth, but Super 8 approved the refund and Expedia verified it with them and in about 45 days, I got the refund. I would call the hotel first and have that discussion.

With building materials through the roof and still climbing, I don't believe you will see a decline until they stabilize. We are getting notices on a weekly basis from our manufacturers for material adjustments and shortages in the supply chain and on average, the increase on a modest 1500 sq.' modular has been around $5,000 since March, and when that's coupled to the increases for the rest of the site work, you can easily double that number. Bidding jobs that have production backlogs of 7 months has become challenging to say the least, having no clue where those material costs will go and what shortages may exist at the time of actual construction.

I do wish the Marantz unit wasn't quite so much. I really like the look and all the reviews I've read have been solid. Should be for the price point.

And I looked at it and agreed with your point. I just think it's sad that you can't buy a laptop with a decent soundcard/dac, already built in. Refresh my memory, prior to the Bifrost, you had a ?

Stop already, I'm going to get an external DAC, but I'm also going to get a laptop that performs. I told you I wasn't purchasing any external DAC until I get a chance to hear a few at SWAG. The dragonfly (which I had never even seen one) looks perfect for the laptop when I travel.