rigma

Thanks to everyone for all the nice comments. Special thanks to Mike TN for all his help and the nice write up. I think he should be a technical writer Coytee you have it right, good memory. rigma

Yes, I'm using a Crown USM-810 for the rears, Danley's and the 2 front Jube bass bins (without horns). Passives are used for the front left, right and center.

Thanks for all the compliments from everyone. A special thanks to Mike TN (mikebse2a3) for comming this past weekend to help get it all tuned up. Oh, and for my wife Beck for liking this stuff as much as I do and helping in all the builds. rigma

Close up of the crossover network.

See 4 post up. You were probably post at the same time I was writing it.

The room is 25 X 30. Will take a pic of the network and post.

The front left and right Jubilee's are 'clones' we built about 5 years ago. All of the other 5 are factory built. Behind the left and right Jubilee's are Danley DTS-10's which we built from kits. The crossovers you see on the sidewalls were built by us to Roy's schematic using the best components we could find. Following is the way the speakers are used: FOR MUSIC: Front L & R and Center Jubilee's with 402/TAD 4002 are powered by WE-300B Mono Blocks built from scratch. The other front Jubilee Bass Bins are powered by Crown K1 and are operating from 20 HZ to 55 HZ with EQ to add only the frequency's needed to obtain a flat response down to 20 HZ. The rear Jubilee Bass Bins, also powered by Crown K1, are adding a little boost at 32 HZ only. The preamp is a scratch built Berman 76 with a custom phono section designed by K&K Audio. Turntable is a VPI Aries II with Ortofon Jubilee cartridge. CD Player is Jolida feeding a K&K Audio extreme RAK DAC FOR HOME THEATER: Front L & R are powered by a Crown D-300A Series II with speakers set to small. Center is powered by a Crown D-150A Series II in Mono. The other front Jubilee Bass Bins are powered by Crown K1 and are operating from 30 HZ to 80 HZ The Danley's are powered by Crown K1 and are operating from 10 HZ to 40 HZ The rear Jubilee Bass Bins, also powered by Crown K1, and the 501/K69 horn is powered by a Crown D-150A series II The preamp processor is a McIntosh MX-135 Blu-Ray player is an OPPO Special Edition Screen is 110" Seymour Acoustically Transparent For both Music and HT: The sub processing and rear are handled by a USM-810. The bass is tamed by a analog Rives Parc Unit.

12

11

10

9

8

7

6

5

4

3

2

It's taken 40 years, since my first Khorns, to get to this level. Will post more photos and details.

PM sent rigma

Those are amazing...but I knew they would be rigma

Greg Do you want to sell your Jubilees or 402s. I am interested if so! rigma

IMHO the best bang for the buck in that range is the Epson 8500 UB

CCR Box set for sale $150 shipped anywhere in USA free. Save $50 + shipping. rigma

Yea, I suspect it is a system difference. My wife is a big CCR fan and walked out of the room on the first Lp. We will try again tonight at a lower volume and if we feel the same way we will offer the set for sale for $150. rigma