Panacea Engineering Posted August 23, 2012 Share Posted August 23, 2012 It is very hard to tell from the picture but that looks like the 904 Tractrix Horn. Is it using the 1133 Driver? Quote Link to comment Share on other sites More sharing options...
Coytee Posted August 23, 2012 Share Posted August 23, 2012 check out the shape on my 510, Sexy! Quote Link to comment Share on other sites More sharing options...
Turbox Posted August 23, 2012 Author Share Posted August 23, 2012 Here is a closer look at the 510, paired with the K69A driver. Quote Link to comment Share on other sites More sharing options...
Turbox Posted August 26, 2012 Author Share Posted August 26, 2012 this schematic is for a 2-way involving a k-69/k-402 and the jub bass bin. if you have a 2-way for the top end which splits between the k-1133 and k-69, you can put that crossover inbetween the drivers and hi pass section of the schematic below. What is the xover frequency on this? does anyone know? Quote Link to comment Share on other sites More sharing options...
Guest " " Posted August 26, 2012 Share Posted August 26, 2012 400hz and 3khz @ 24db per octave. You have a behind the screen crossover. Quote Link to comment Share on other sites More sharing options...
Turbox Posted August 27, 2012 Author Share Posted August 27, 2012 this schematic is for a 2-way involving a k-69/k-402 and the jub bass bin. if you have a 2-way for the top end which splits between the k-1133 and k-69, you can put that crossover inbetween the drivers and hi pass section of the schematic below. What is the xover frequency on this? does anyone know? I should have been more specific, in the two way design that Roy has for the Jub bin, and 402 using the k69A, what is the xover frequency for that unit? i heard 500Hz? it doesnt say on the schematic at all. Quote Link to comment Share on other sites More sharing options...
RRFL Posted August 27, 2012 Share Posted August 27, 2012 this schematic is for a 2-way involving a k-69/k-402 and the jub bass bin. if you have a 2-way for the top end which splits between the k-1133 and k-69, you can put that crossover inbetween the drivers and hi pass section of the schematic below. What is the xover frequency on this? does anyone know? I should have been more specific, in the two way design that Roy has for the Jub bin, and 402 using the k69A, what is the xover frequency for that unit? i heard 500Hz? it doesnt say on the schematic at all. I think you might be able to fit the K69 driver onto the KPT-402 and the run it as a Two Way with the Crossover in this Schematic for a comparison. Quote Link to comment Share on other sites More sharing options...
Coytee Posted August 28, 2012 Share Posted August 28, 2012 I should have been more specific, in the two way design that Roy has for the Jub bin, and 402 using the k69A, what is the xover frequency for that unit? i heard 500Hz? it doesnt say on the schematic at all. With the active crossover, we're crossing the bass bin at 450hz but the K402/K69 is being crossed at 380hz Something to do with polars and other things over my head. All I know is it works [Y] I don't know the crossover point when using passive. Quote Link to comment Share on other sites More sharing options...
mark1101 Posted August 29, 2012 Share Posted August 29, 2012 Roy always said that marketing liked the "mumps" on the HF horns. Sold better.[] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.