mike stehr Posted December 5, 2014 Share Posted December 5, 2014 (edited) Howdy, I'm in a bit of a situation with receiving unemployment, and need to ditch some things to cover some bills...which are going to be due REAL, REAL soon... I've been a member of the Klipsch message boards since June 2001 or some such, and a member of eBay under the name PovertyAudio. I haven't sold much lately, (can't afford to pay shipping in most cases) but I do have 100% feedback. And I do have a current PayPal account. So... I have a pair of Intact Audio autoformers for the autoformer volume control kit. http://www.intactaudio.com/atten.html http://www.intactaudio.com/AVC_wiring.html I'm pretty sure I have them gapped for maximum bass if I recall. One can restack the laminations for different inductance, the formula is on the website. These are pretty much like new, with just little bit of the input leads cut. I used D-sub connector pins on the tap pins, so there is no solder on them. Put them in a box with a 24 position switch with some RCA jacks, and there ya go. I'll throw in the two-deck 24 position switch, but it has wires on it. They will be packed with extreme care for shipment. $100.00 PM if interested, for email addy, questions, etc... Thanks! Mike Stehr Edited December 7, 2014 by mike stehr Quote Link to comment Share on other sites More sharing options...
ACM Posted December 6, 2014 Share Posted December 6, 2014 PM sent Quote Link to comment Share on other sites More sharing options...
brians7 Posted December 7, 2014 Share Posted December 7, 2014 Howdy, I'm in a bit of a situation with receiving unemployment, and need to ditch some things to cover some bills...which are going to be due REAL, REAL soon... I've been a member of the Klipsch message boards since June 2001 or some such, and a member of eBay under the name PovertyAudio. I haven't sold much lately, (can't afford to pay shipping in most cases) but I do have 100% feedback. And I do have a current PayPal account. So... I have a pair of Intact Audio autoformers for the autoformer volume control kit. http://www.intactaudio.com/atten.html http://www.intactaudio.com/AVC_wiring.html I'm pretty sure I have them gapped for maximum bass if I recall. One can restack the laminations for different inductance, the formula is on the website. These are pretty much like new, with just little bit of the input leads cut. I used D-sub connector pins on the tap pins, so there is no solder on them. 002.JPG 003.JPG 004.JPG 005.JPG 006.JPG Put them in a box with a 24 position switch with some RCA jacks, and there ya go. I'll throw in the two-deck 24 position switch, but it has wires on it. 020.JPG They will be packed with extreme care for shipment. $100.00 PM if interested, for email addy, questions, etc... Thanks! Mike Stehr I take them if there not sold yet. Thanks Brian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.