Onebadta Posted February 22, 2016 Share Posted February 22, 2016 I bought a SW15ii that's missing the sub, (got almost nothing in it) anyways where can i get a replacement subwoofer? 3.65 is the volume of the enclosure. The amp and passive radiator Is there. Any suggestions? Quote Link to comment Share on other sites More sharing options...
derrickdj1 Posted February 22, 2016 Share Posted February 22, 2016 Call Klipsch for a replacement driver? You could also check Ebay. Quote Link to comment Share on other sites More sharing options...
jjptkd Posted February 22, 2016 Share Posted February 22, 2016 Sounds like a good size for the Sundown SA-15 driver. The dual 4 ohm driver wired in series will give you an 8 ohm load. They're rated for 600 watts RMS but they really don't need that much power to produce good clean sound. http://www.ebay.com/itm/131259196004?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT Quote Link to comment Share on other sites More sharing options...
jason str Posted February 22, 2016 Share Posted February 22, 2016 (edited) Once you subtract the amplifier, passive and driver you end up with less volume in the enclosure. The Dayton RSS390HO-4 will work if your amplifier can drive a 4 Ohm load, measure to see if it fits first before you go through all the trouble. Edited February 22, 2016 by jason str Quote Link to comment Share on other sites More sharing options...
Onebadta Posted March 7, 2016 Author Share Posted March 7, 2016 Well I'm still looking and pondering my replacement. Here are a couple links tell me what you think? http://www.eminence.com/speakers/speaker-detail/?model=LAB_15 Or http://peavey.com/products/index.cfm/item/723/116625/15"LowRider%26reg%3BSubwoofer These both seem to have better overall specs, let me know that ya think. Nothing is available from Klipsch now for this model. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.